>[оверквотинг удален]
> »ip route replace default dev wlan0
> »ip route ls
> default dev wlan0 scope link
> 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.2
> 192.168.0.1 dev wlan0 proto dhcp scope link src 192.168.0.2 metric 1024
> »ip r g 8.8.8.8
> 8.8.8.8 dev wlan0 src 192.168.0.2
> cache
> Но, ping 8.8.8.8 не работает. telnet ya.ru 80 не работает, ведь нет
> маршрутов никуда.что-то делаешь не так
root@jessie:~# ip r
default via 192.168.1.1 dev eth0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip r d 0/0
root@jessie:~# ip r
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip r a 0/0 via 192.168.1.1
root@jessie:~# ip r g 8.8.8.8
8.8.8.8 via 192.168.1.1 dev eth0 src 192.168.1.216
cache
root@jessie:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
64 bytes from 8.8.8.8: icmp_seq=0 ttl=54 time=29,507 ms
^C--- 8.8.8.8 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max/stddev = 29,507/29,507/29,507/0,000 ms
root@jessie:~# ip li add name g1 type gre remote 12.12.12.12 local 13.13.13.13
root@jessie:~# ip r
default via 192.168.1.1 dev eth0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip a a 23.23.23.23 remote 123.23.23.23 dev g1
root@jessie:~# ip r
default via 192.168.1.1 dev eth0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip li set g1 up
root@jessie:~# ip r
default via 192.168.1.1 dev eth0
123.23.23.23 dev g1 proto kernel scope link src 23.23.23.23
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip r d 0/0
root@jessie:~# ip r
123.23.23.23 dev g1 proto kernel scope link src 23.23.23.23
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ip route add default scope global nexthop via 192.168.1.1 dev eth0 weight 1 nexthop via 123.23.23.23 dev g1 weight 2
root@jessie:~# ip r
default
nexthop via 192.168.1.1 dev eth0 weight 1
nexthop via 123.23.23.23 dev g1 weight 2
123.23.23.23 dev g1 proto kernel scope link src 23.23.23.23
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.216
root@jessie:~# ping 8.8.8.8
PING 8.8.8.8 (8.8.8.8): 56 data bytes
^C--- 8.8.8.8 ping statistics ---
30 packets transmitted, 0 packets received, 100% packet loss
при этом в консоле с tcpdump'ом видно
root@jessie:~# tcpdump -npi g1
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on g1, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
22:35:19.536968 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 14, length 64
22:35:20.538165 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 15, length 64
22:35:21.539322 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 16, length 64
22:35:22.540509 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 17, length 64
22:35:23.541709 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 18, length 64
22:35:24.542907 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 19, length 64
22:35:25.544106 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 20, length 64
22:35:26.545302 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 21, length 64
22:35:27.546478 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 22, length 64
22:35:28.547673 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 23, length 64
22:35:29.548858 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 24, length 64
22:35:30.550062 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 25, length 64
22:35:31.551264 IP 23.23.23.23 > 8.8.8.8: ICMP echo request, id 2854, seq 26, length 64
это во первых
а во вторых, так поделить увеличить пропускную способность конечно можно, но лучше не надо, по крайней мере без использования промежуточного узла хождение по тырнетам будет работать через жoпy
