The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

Поиск:  Каталог документации

Next Previous Contents

5. Running The Daemons

The two SMB daemons are /usr/sbin/smbd and /usr/sbin/nmbd. Under most Linux distributions, these are started, stoped and restarted via the startup script located in /etc/rc.d/init.d/smb and symlinked to the appropriate runlevels.

If you choose not to use the standard startup script, you can run the Samba daemons from inetd or as stand-alone processes. Samba will respond slightly faster as a standalone daemon than running from inetd.

In either case, you should check the file /etc/services for lines that look like this:


netbios-ns      137/tcp         nbns
netbios-ns      137/udp         nbns
netbios-dgm     138/tcp         nbdgm
netbios-dgm     138/udp         nbdgm
netbios-ssn     139/tcp         nbssn

Make sure they are all uncommented. Depending on your distribution, you may even need to add them. Samba will not be able to bind to the appropriate ports unless /etc/services has these entries.

To run the daemons from inetd, place the following lines in the inetd configuration file, /etc/inetd.conf:


    # SAMBA NetBIOS services (for PC file and print sharing)
    netbios-ssn stream tcp nowait root /usr/sbin/smbd smbd
    netbios-ns dgram udp wait root /usr/sbin/nmbd nmbd

Then restart the inetd daemon by running the command:


    kill -HUP `cat /var/run/inetd.pid`

To run the daemons from the system startup scripts, put the following script in file called /etc/rc.d/init.d/smb (for most distributions) and symbolically link it to the files specified in the comments:


    #!/bin/sh

    #
    # /etc/rc.d/init.d/smb - starts and stops SMB services.
    #
    # The following files should be synbolic links to this file:
    # symlinks: /etc/rc.d/rc1.d/K35smb  (Kills SMB services on shutdown)
    #           /etc/rc.d/rc3.d/S91smb  (Starts SMB services in multiuser mode)
    #           /etc/rc.d/rc6.d/K35smb  (Kills SMB services on reboot)
    #

    # Source function library.
    . /etc/rc.d/init.d/functions

    # Source networking configuration.
    . /etc/sysconfig/network

    # Check that networking is up.
    [ ${NETWORKING} = "no" ] && exit 0

    # See how we were called.
    case "$1" in
      start)
        echo -n "Starting SMB services: "
        daemon smbd -D  
        daemon nmbd -D 
        echo
        touch /var/lock/subsys/smb
        ;;
      stop)
        echo -n "Shutting down SMB services: "
        killproc smbd
        killproc nmbd
        rm -f /var/lock/subsys/smb
        echo ""
        ;;
      *)
        echo "Usage: smb {start|stop}"
        exit 1
    esac

If when starting Samba you get an error that says something about the daemon failing to bind to port 139, then you probably have another Samba process already running that hasn't yet shut down. Check a process list (with 'ps auxww | grep mbd') to determine if another Samba service is running.


Next Previous Contents


Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру