forum.opennet.ru

Составление сообщения

Исходное сообщение

"Intel MatrixRAID RAID1"
Отправлено White_Angel, 15-Янв-11 03:49

> а смарты винтов не смотрели? может все гораздо банальнее ... ?
По моему все ок, но я начинающий, может чего-то не узрел.
Вот:
localhost# smartctl -a /dev/ad8
smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12 family
Device Model:     ST3500418AS
Serial Number:    9VMS9SX5
Firmware Version: CC46
User Capacity:    500,107,862,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Jan 15 10:38:15 2011 VLAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   107   100   006    Pre-fail  Always       -       12633123
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       34
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       132643
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       40
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       17
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   053   045    Old_age   Always       -       27 (Min/Max 20/32)
194 Temperature_Celsius     0x0022   027   047   000    Old_age   Always       -       27 (0 20 0 0)
195 Hardware_ECC_Recovered  0x001a   032   031   000    Old_age   Always       -       12633123
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       30245159698497
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       989494798
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3712462348
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
localhost# smartctl -a /dev/ad10
smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12 family
Device Model:     ST3500418AS
Serial Number:    9VMS9W29
Firmware Version: CC46
User Capacity:    500,107,862,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sat Jan 15 10:41:08 2011 VLAT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  85) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   107   100   006    Pre-fail  Always       -       13323795
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       34
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       202750
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       40
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       17
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   052   045    Old_age   Always       -       27 (Min/Max 20/31)
194 Temperature_Celsius     0x0022   027   048   000    Old_age   Always       -       27 (0 20 0 0)
195 Hardware_ECC_Recovered  0x001a   029   025   000    Old_age   Always       -       13323795
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       87952340287572
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       600480205
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2630120020
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
localhost# smartctl -a /dev/ar0
smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
/dev/ar0: Unable to detect device type
Smartctl: please specify device type with the -d option.
Use smartctl -h to get a usage summary
Я в инете прочитал, что этот WARING это вроде что то с буфером.

Исходное сообщение
"Intel MatrixRAID RAID1" Отправлено White_Angel, 15-Янв-11 03:49
> а смарты винтов не смотрели? может все гораздо банальнее ... ? По моему все ок, но я начинающий, может чего-то не узрел. Вот: localhost# smartctl -a /dev/ad8 smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 family Device Model: ST3500418AS Serial Number: 9VMS9SX5 Firmware Version: CC46 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sat Jan 15 10:38:15 2011 VLAT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 107 100 006 Pre-fail Always - 12633123 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 34 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 132643 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 40 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 17 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 053 045 Old_age Always - 27 (Min/Max 20/32) 194 Temperature_Celsius 0x0022 027 047 000 Old_age Always - 27 (0 20 0 0) 195 Hardware_ECC_Recovered 0x001a 032 031 000 Old_age Always - 12633123 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 30245159698497 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 989494798 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3712462348 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. localhost# smartctl -a /dev/ad10 smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.12 family Device Model: ST3500418AS Serial Number: 9VMS9W29 Firmware Version: CC46 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Sat Jan 15 10:41:08 2011 VLAT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 107 100 006 Pre-fail Always - 13323795 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 34 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 202750 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 40 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 17 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 052 045 Old_age Always - 27 (Min/Max 20/31) 194 Temperature_Celsius 0x0022 027 048 000 Old_age Always - 27 (0 20 0 0) 195 Hardware_ECC_Recovered 0x001a 029 025 000 Old_age Always - 13323795 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 87952340287572 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 600480205 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 2630120020 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. localhost# smartctl -a /dev/ar0 smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net /dev/ar0: Unable to detect device type Smartctl: please specify device type with the -d option. Use smartctl -h to get a usage summary Я в инете прочитал, что этот WARING это вроде что то с буфером.

Ваше сообщение
Имя*:
EMail:	Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	>> а смарты винтов не смотрели? может все гораздо банальнее ... ? > По моему все ок, но я начинающий, может чего-то не узрел. > Вот: > localhost# smartctl -a /dev/ad8 > smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > === START OF INFORMATION SECTION === > Model Family: Seagate Barracuda 7200.12 family > Device Model: ST3500418AS > Serial Number: 9VMS9SX5 > Firmware Version: CC46 > User Capacity: 500,107,862,016 bytes > Device is: In smartctl database > [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 4 > Local Time is: Sat Jan 15 10:38:15 2011 VLAT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > General SMART Values: > Offline data collection status: (0x82) Offline data collection activity > > > > was completed without error. > > > > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 0) > The previous self-test routine completed > > > > without error or no self-test > has ever > > > > been run. > Total time to complete Offline > data collection: > ( 600) seconds. > Offline data collection > capabilities: > (0x7b) SMART execute > Offline immediate. > > > > Auto Offline data collection on/off > support. > > > > Suspend Offline collection upon new > > > > command. > > > > Offline surface scan supported. > > > > Self-test supported. > > > > Conveyance Self-test supported. > > > > Selective Self-test supported. > SMART capabilities: > (0x0003) Saves SMART data before entering > > > > power-saving mode. > > > > Supports SMART auto save timer. > Error logging capability: (0x01) Error > logging supported. > > > > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( > 1) minutes. > Extended self-test routine > recommended polling time: ( > 85) minutes. > Conveyance self-test routine > recommended polling time: ( > 2) minutes. > SCT capabilities: > (0x103f) SCT Status supported. > > > > SCT Error Recovery Control supported. > > > > SCT Feature Control supported. > > > > SCT Data Table supported. > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG > VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 107 > 100 006 Pre-fail > Always - > 12633123 > 3 Spin_Up_Time > 0x0003 097 097 > 000 Pre-fail Always > - 0 > 4 Start_Stop_Count 0x0032 > 100 100 020 > Old_age Always > - 34 > 5 Reallocated_Sector_Ct 0x0033 100 > 100 036 Pre-fail Always > - > 0 > 7 Seek_Error_Rate > 0x000f 100 253 030 > Pre-fail Always > - 132643 > 9 Power_On_Hours > 0x0032 100 100 000 > Old_age Always > - 40 > 10 Spin_Retry_Count 0x0013 > 100 100 097 > Pre-fail Always - > 0 > 12 Power_Cycle_Count 0x0032 > 100 100 020 Old_age > Always - > 17 > 183 Runtime_Bad_Block 0x0032 100 > 100 000 Old_age > Always - > 0 > 184 End-to-End_Error 0x0032 > 100 100 099 Old_age > Always - > 0 > 187 Reported_Uncorrect 0x0032 100 > 100 000 Old_age > Always - > 0 > 188 Command_Timeout 0x0032 > 100 100 000 > Old_age Always - > 0 > 189 High_Fly_Writes 0x003a > 100 100 000 > Old_age Always - > 0 > 190 Airflow_Temperature_Cel 0x0022 073 053 045 > Old_age Always > - 27 (Min/Max > 20/32) > 194 Temperature_Celsius 0x0022 027 > 047 000 Old_age Always > - > 27 (0 20 0 0) > 195 Hardware_ECC_Recovered 0x001a 032 031 > 000 Old_age Always > - 12633123 > 197 Current_Pending_Sector 0x0012 100 100 > 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0010 100 100 > 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x003e 200 200 > 000 Old_age Always > - > 0 > 240 Head_Flying_Hours 0x0000 100 > 253 000 Old_age > Offline - > 30245159698497 > 241 Total_LBAs_Written 0x0000 100 > 253 000 Old_age > Offline - > 989494798 > 242 Total_LBAs_Read 0x0000 > 100 253 000 > Old_age Offline - > 3712462348 > SMART Error Log Version: 1 > No Errors Logged > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 > 0 0 Not_testing > 2 > 0 0 Not_testing > 3 > 0 0 Not_testing > 4 > 0 0 Not_testing > 5 > 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > localhost# smartctl -a /dev/ad10 > smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > === START OF INFORMATION SECTION === > Model Family: Seagate Barracuda 7200.12 family > Device Model: ST3500418AS > Serial Number: 9VMS9W29 > Firmware Version: CC46 > User Capacity: 500,107,862,016 bytes > Device is: In smartctl database > [for details use: -P show] > ATA Version is: 8 > ATA Standard is: ATA-8-ACS revision 4 > Local Time is: Sat Jan 15 10:41:08 2011 VLAT > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > General SMART Values: > Offline data collection status: (0x82) Offline data collection activity > > > > was completed without error. > > > > Auto Offline Data Collection: Enabled. > Self-test execution status: ( 0) > The previous self-test routine completed > > > > without error or no self-test > has ever > > > > been run. > Total time to complete Offline > data collection: > ( 600) seconds. > Offline data collection > capabilities: > (0x7b) SMART execute > Offline immediate. > > > > Auto Offline data collection on/off > support. > > > > Suspend Offline collection upon new > > > > command. > > > > Offline surface scan supported. > > > > Self-test supported. > > > > Conveyance Self-test supported. > > > > Selective Self-test supported. > SMART capabilities: > (0x0003) Saves SMART data before entering > > > > power-saving mode. > > > > Supports SMART auto save timer. > Error logging capability: (0x01) Error > logging supported. > > > > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( > 1) minutes. > Extended self-test routine > recommended polling time: ( > 85) minutes. > Conveyance self-test routine > recommended polling time: ( > 2) minutes. > SCT capabilities: > (0x103f) SCT Status supported. > > > > SCT Error Recovery Control supported. > > > > SCT Feature Control supported. > > > > SCT Data Table supported. > SMART Attributes Data Structure revision number: 10 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG > VALUE WORST THRESH TYPE > UPDATED WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x000f 107 > 100 006 Pre-fail > Always - > 13323795 > 3 Spin_Up_Time > 0x0003 097 097 > 000 Pre-fail Always > - 0 > 4 Start_Stop_Count 0x0032 > 100 100 020 > Old_age Always > - 34 > 5 Reallocated_Sector_Ct 0x0033 100 > 100 036 Pre-fail Always > - > 0 > 7 Seek_Error_Rate > 0x000f 100 253 030 > Pre-fail Always > - 202750 > 9 Power_On_Hours > 0x0032 100 100 000 > Old_age Always > - 40 > 10 Spin_Retry_Count 0x0013 > 100 100 097 > Pre-fail Always - > 0 > 12 Power_Cycle_Count 0x0032 > 100 100 020 Old_age > Always - > 17 > 183 Runtime_Bad_Block 0x0032 100 > 100 000 Old_age > Always - > 0 > 184 End-to-End_Error 0x0032 > 100 100 099 Old_age > Always - > 0 > 187 Reported_Uncorrect 0x0032 100 > 100 000 Old_age > Always - > 0 > 188 Command_Timeout 0x0032 > 100 100 000 > Old_age Always - > 0 > 189 High_Fly_Writes 0x003a > 100 100 000 > Old_age Always - > 0 > 190 Airflow_Temperature_Cel 0x0022 073 052 045 > Old_age Always > - 27 (Min/Max > 20/31) > 194 Temperature_Celsius 0x0022 027 > 048 000 Old_age Always > - > 27 (0 20 0 0) > 195 Hardware_ECC_Recovered 0x001a 029 025 > 000 Old_age Always > - 13323795 > 197 Current_Pending_Sector 0x0012 100 100 > 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0010 100 100 > 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x003e 200 200 > 000 Old_age Always > - > 0 > 240 Head_Flying_Hours 0x0000 100 > 253 000 Old_age > Offline - > 87952340287572 > 241 Total_LBAs_Written 0x0000 100 > 253 000 Old_age > Offline - > 600480205 > 242 Total_LBAs_Read 0x0000 > 100 253 000 > Old_age Offline - > 2630120020 > SMART Error Log Version: 1 > No Errors Logged > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 > 0 0 Not_testing > 2 > 0 0 Not_testing > 3 > 0 0 Not_testing > 4 > 0 0 Not_testing > 5 > 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > localhost# smartctl -a /dev/ar0 > smartctl 5.40 2010-10-16 r3189 [FreeBSD 7.3-RELEASE i386] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > /dev/ar0: Unable to detect device type > Smartctl: please specify device type with the -d option. > Use smartctl -h to get a usage summary > Я в инете прочитал, что этот WARING это вроде что то с > буфером.
	Введите код, изображенный на картинке:

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

На сайте действует частичное премодерирование - после публикации некоторые сообщения от анонимов могут автоматически скрываться ботом. После проверки модератором ошибочно скрытые сообщения раскрываются. Для ускорения раскрытия можно воспользоваться ссылкой "Сообщить модератору", указав в качестве причины обращения "скрыто по ошибке".

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру