So we'll compiling the latest sources from ALSA, which should work for any other distrib as well... just the kernel sources will change because mandrake uses specific patches.
You may get your kernel sources from your distribution or from http://www.kernel.org
Here can be found Mandrake sources for the kernel used in 8.0:
and grab the tarball from ALSA:
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-0.9.0beta10.tar.bz2
Install your kernel sources, in my case:
rpm -ivh kernel-source-2.4.3-20mdk.i586.rpm
Then decompress alsa drivers:
bzip2 -d alsa-driver-0.9.0beta10.tar.bz2 && tar -xvf alsa-driver-0.9.0beta10.tar
Make them and install them and create the devices files:
cd alsa-driver-0.9.0beta10 && make install && ./snddevices
Edit /etc/modules.conf
to set everything, and add to it the following
lines:
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-card-intel8x0
Paolo reports that in order to start up sensord on boot, he put in /etc/sysconfig/sensors:
MODULE_0=i2c-proc
MODULE_1=it87
MODULE_2=i2c-isa
If you are using a 2.4 or later kernel you can use the Audio Codec '97 (AC'97) sound driver, as the integrated sound card is AC'97 complaint.
You may enable your soundcard with a kernel module, as a matter of fact, you should be able to just use the module without even recompiling your kernel, because most GNU/Linux distributions have it already, just type:
modprobe i810_audio
and you should see something like this in your syslog:
Intel 810 + AC97 Audio, version 0.21, 21:31:04 Apr 15 2002
i810: SiS 7012 found at IO 0xd800 and 0xdc00, IRQ 11
i810_audio: Audio Controller supports 2 channels.
ac97_codec: AC97 Audio codec, id: 0x414c:0x4710 (ALC200/200P)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
or type
dmesg | less and scroll to see the kernel messages.
If everything went fine, you may add i810_audio
to
/etc/modules
so it will autoload everytime you boot:
echo "i810_audio" >> /etc/modules
or you like monolitic kernels (no modules), follow the step above to install
the kernel sources
and say Y to Sound card support
and Y to Intel ICH (i8xx) audio
support
compile your kernel, install, reboot and now your integrated soundcard is
working.
If you don't know how to compile a kernel, read the Kernel HOWTO, it's easy and you'll get a optimized kernel for you system, also you'll learn a bit about that talk of using the source code (yes you are already taking advantage of it :-)
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |