The CD-ROM doesn't boot
Check your BIOS settings to make sure that your machine is configured to boot from the CD-ROM drive; also make sure that the CD-ROM is the first boot device.
The SVGA interface doesn't work, or the display is incorrect
Boot into Expert mode, and send us mail describing your video hardware so that we can correct this in future versions. (You won't be able to use clumpview for now.) If at all possible, please send us a working libsvga configuration file for the machine in question.
The network adapter isn't detected/autoconfigured (or no DHCP)
If you see a message (in clumpview) stating that no Ethernet devices were configured, or that this node isn't configured yet, then either your Ethernet card was not detected or the system was not able to configure the card via DHCP.
If you don't have a DHCP server configured and running on your local network, clump/os will never autoconfigure; if you have multiple connected network adapters, then clump/os may not configure MOSIX properly. If auto-probing for your network adapter doesn't work, or if you aren't using DHCP, then you'll have to configure your card manually in Expert mode -- using insmod, ifconfig, and route -- and then configure MOSIX via setpe.
If you do need to manually configure your network adapter, please advise us. We'd like to solve this problem, if possible, or at least document which network cards auto-probe correctly.
Migrating processes generate errors ("Network Unreachable")
This rare problem can be caused by conflicts resulting from differently configured kernels -- even if you are using the correct MOSIX and Linux kernel versions. If clump/os correctly detects all your nodes, but migrating processes generate errors, then please compare your master node's kernel configuration file with the R4.x kernel .config.
Migrating processes generate errors ("Process migration failed: incompatible topology")
You are likely using master nodes with CONFIG_MOSIX_TOPOLOGY defined, which is not supported by clump/os at this time. See Requirements, and compare your kernel configuration as per the previous FAQ; you will need to recompile your master node kernel(s).
If you don't find your issue here, please consider posting to the clump/os mailing list. (Please note that only subscribers are permitted to post; click on the link for instructions.) You should also make certain that you are using the latest versions of MOSIX and clump/os, and that the versions -- clump/os R4.x and MOSIX 1.5.2 at the time of this writing -- are in sync.
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |