Интерактивная система просмотра системных руководств (man-ов)
grops (1)
grops (1) ( FreeBSD man: Команды и прикладные программы пользовательского уровня )
>> grops (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
NAME
grops - PostScript driver for groff
SYNOPSIS
grops
[ -glmv ]
[ -b n ]
[ -c n ]
[ -F dir ]
[ -p papersize ]
[ -P prologue ]
[ -w n ]
[ files... ]
It is possible to have whitespace between a command line option and its
parameter.
DESCRIPTION
grops
translates the output of GNU
troff
to PostScript.
Normally
grops
should be invoked by using the groff command
with a
-Tps
option.
(Actually, this is the default for groff.)
If no files are given,
grops
will read the standard input.
A filename of
-
will also cause
grops
to read the standard input.
PostScript output is written to the standard output.
When
grops
is run by
groff
options can be passed to
grops
using the
groff-P
option.
OPTIONS
-bn
Workaround broken spoolers and previewers.
Normally
grops
produces output that conforms
the Document Structuring Conventions version 3.0.
Unfortunately some spoolers and previewers can't handle such output.
The value of~n
controls what
grops
does to its output acceptable to such programs.
A value of~0 will cause grops not to employ any workarounds.
Add~1 if no
%%BeginDocumentSetup
and
%%EndDocumentSetup
comments should be generated;
this is needed for early versions of TranScript that get confused by
anything between the
%%EndProlog
comment and the first
%%Page
comment.
Add~2 if lines in included files beginning with
%!
should be stripped out; this is needed for Sun's pageview previewer.
Add~4 if
%%Page,
%%Trailer
and
%%EndProlog
comments should be
stripped out of included files; this is needed for spoolers that
don't understand the
%%BeginDocument
and
%%EndDocument
comments.
Add~8 if the first line of the PostScript output should be
%!PS-Adobe-2.0
rather than
%!PS-Adobe-3.0;
this is needed when using Sun's Newsprint with a printer that requires
page reversal.
The default value can be specified by a
broken n
command in the DESC file.
Otherwise the default value is~0.
-cn
Print
n
copies of each page.
-Fdir
Prepend directory
dir/devname
to the search path for prologue, font, and device description files;
name
is the name of the device, usually
ps.
-g
Guess the page length.
This generates PostScript code that guesses the page length.
The guess will be correct only if the imageable area is vertically
centered on the page.
This option allows you to generate documents that can be printed
both on letter (8.5в11) paper and on A4 paper without change.
-l
Print the document in landscape format.
-m
Turn manual feed on for the document.
-ppaper-size
Set physical dimension of output medium.
This overrides the
papersize
and
paperlength
commands in the
DESC
file; it accepts the same arguments as the
papersize
command.
-Pprologue-file
Use the file
prologue-file
(in the font path) as the prologue instead of the default prologue file
prologue.
This option overrides the environment variable
GROPS_PROLOGUE.
-wn
Lines should be drawn using a thickness of
n~thousandths of an em.
If this option is not given, the line thickness defaults to 0.04~em.
-v
Print the version number.
USAGE
There are styles called
R,
I,
B,
and
BI
mounted at font positions 1 to~4.
The fonts are grouped into families
A,
BM,
C,
H,
HN,
N,
P
and~T
having members in each of these styles:
AR
AvantGarde-Book
AI
AvantGarde-BookOblique
AB
AvantGarde-Demi
ABI
AvantGarde-DemiOblique
BMR
Bookman-Light
BMI
Bookman-LightItalic
BMB
Bookman-Demi
BMBI
Bookman-DemiItalic
CR
Courier
CI
Courier-Oblique
CB
Courier-Bold
CBI
Courier-BoldOblique
HR
Helvetica
HI
Helvetica-Oblique
HB
Helvetica-Bold
HBI
Helvetica-BoldOblique
HNR
Helvetica-Narrow
HNI
Helvetica-Narrow-Oblique
HNB
Helvetica-Narrow-Bold
HNBI
Helvetica-Narrow-BoldOblique
NR
NewCenturySchlbk-Roman
NI
NewCenturySchlbk-Italic
NB
NewCenturySchlbk-Bold
NBI
NewCenturySchlbk-BoldItalic
PR
Palatino-Roman
PI
Palatino-Italic
PB
Palatino-Bold
PBI
Palatino-BoldItalic
TR
Times-Roman
TI
Times-Italic
TB
Times-Bold
TBI
Times-BoldItalic
There is also the following font which is not a member of a family:
ZCMI
ZapfChancery-MediumItalic
There are also some special fonts called
SS
and~S.
Zapf Dingbats is available as
ZD
and a reversed version of ZapfDingbats (with symbols pointing in the opposite
direction) is available as
ZDR;
most characters in these fonts are unnamed and must be accessed using
[rs]N.
The default color for
[rs]m
and
[rs]M
is black; for colors defined in the `rgb' color space,
setrgbcolor
is used, for `cmy' and `cmyk'
setcmykcolor,
and for `gray'
setgray.
grops
understands various X~commands produced using the
[rs]X
escape sequence;
grops
will only interpret commands that begin with a
ps:
tag.
[rs]X'ps: exec code'
This executes the arbitrary PostScript commands in
code.
The PostScript currentpoint will be set to the position of the
[rs]X
command before executing
code.
The origin will be at the top left corner of the page,
and y~coordinates will increase down the page.
A procedure~u
will be defined that converts groff units
to the coordinate system in effect.
For example,
.nr x 1i [rs]X'ps: exec [rs]nx u 0 rlineto stroke'
will draw a horizontal line one inch long.
code
may make changes to the graphics state,
but any changes will persist only to the
end of the page.
A dictionary containing the definitions specified by the
def
and
mdef
will be on top of the dictionary stack.
If your code adds definitions to this dictionary,
you should allocate space for them using
[rs]X'ps mdef n'.
Any definitions will persist only until the end of the page.
If you use the
[rs]Y
escape sequence with an argument that names a macro,
code
can extend over multiple lines.
For example,
.nr x 1i
.de y
ps: exec
[rs]nx u 0 rlineto
stroke
..
[rs]Yy
is another way to draw a horizontal line one inch long.
[rs]X'ps: file name'
This is the same as the
exec
command except that the PostScript code is read from file
name.
[rs]X'ps: def code'
Place a PostScript definition contained in
code
in the prologue.
There should be at most one definition per
[rs]X
command.
Long definitions can be split over several
[rs]X
commands;
all the
code
arguments are simply joined together separated by newlines.
The definitions are placed in a dictionary which is automatically
pushed on the dictionary stack when an
exec
command is executed.
If you use the
[rs]Y
escape sequence with an argument that names a macro,
code
can extend over multiple lines.
[rs]X'ps: mdef n code'
Like
def,
except that
code
may contain up to
n~definitions.
grops
needs to know how many definitions
code
contains
so that it can create an appropriately sized PostScript dictionary
to contain them.
Import a PostScript graphic from
file.
The arguments
llx,
lly,
urx,
and
ury
give the bounding box of the graphic in the default PostScript
coordinate system; they should all be integers;
llx
and
lly
are the x and y~coordinates of the lower left
corner of the graphic;
urx
and
ury
are the x and y~coordinates of the upper right corner of the graphic;
width
and
height
are integers that give the desired width and height in groff
units of the graphic.
The graphic will be scaled so that it has this width and height
and translated so that the lower left corner of the graphic is
located at the position associated with
[rs]X
command.
If the height argument is omitted it will be scaled uniformly in the
x and y~directions so that it has the specified width.
Note that the contents of the
[rs]X
command are not interpreted by
troff;
so vertical space for the graphic is not automatically added,
and the
width
and
height
arguments are not allowed to have attached scaling indicators.
If the PostScript file complies with the Adobe Document Structuring
Conventions and contains a
%%BoundingBox
comment, then the bounding box can be automatically
extracted from within groff by using the
psbb
request.
The
-mps
macros (which are automatically loaded when
grops
is run by the groff command) include a
PSPIC
macro which allows a picture to be easily imported.
This has the format
.PSPIC [-L|-R|-In] file [width [height]]
file
is the name of the file containing the illustration;
width
and
height
give the desired width and height of the graphic.
The
width
and
height
arguments may have scaling indicators attached;
the default scaling indicator is~i.
This macro will scale the graphic uniformly
in the x and y~directions so that it is no more than
width
wide
and
height
high.
By default, the graphic will be horizontally centered.
The
-L
and
-R
cause the graphic to be left-aligned and right-aligned
respectively.
The
-I
option causes the graphic to be indented by~n.
[rs]X'ps: invis'
[rs]X'ps: endinvis'
No output will be generated for text and drawing commands
that are bracketed with these
[rs]X
commands.
These commands are intended for use when output from
troff
will be previewed before being processed with
grops;
if the previewer is unable to display certain characters
or other constructs, then other substitute characters or constructs
can be used for previewing by bracketing them with these
[rs]X
commands.
For example,
gxditview
is not able to display a proper
[rs](em
character because the standard X11 fonts do not provide it;
this problem can be overcome by executing the following
request
In this case,
gxditview
will be unable to display the
[rs](em
character and will draw the line,
whereas
grops
will print the
[rs](em
character
and ignore the line.
The input to
grops
must be in the format output by
troff(1).
This is described in
groff_out(5).
In addition the device and font description files for the device used
must meet certain requirements.
The device and font description files supplied for
ps
device meet all these requirements.
afmtodit(1)
can be used to create font files from AFM files.
The resolution must be an integer multiple of~72 times the
sizescale.
The
ps
device uses a resolution of 72000 and a sizescale of 1000.
The device description file should contain a command
paperlength n
which says that output should be generated which is suitable for
printing on a page whose length is
n~machine units.
Common values are 792000 for letter paper and 841890 for paper in A4 format.
Alternatively, it can contain
papersize string
to specify a paper size; see
groff_font(5)
for more information.
Each font description file must contain a command
internalname psname
which says that the PostScript name of the font is
psname.
It may also contain a command
encoding enc_file
which says that
the PostScript font should be reencoded using the encoding described in
enc_file;
this file should consist of a sequence of lines of the form:
pschar code
where
pschar
is the PostScript name of the character,
and
code
is its position in the encoding expressed as a decimal integer.
Lines starting with
#
and blank lines are ignored.
The code for each character given in the font file must correspond
to the code for the character in encoding file, or to the code in the default
encoding for the font if the PostScript font is not to be reencoded.
This code can be used with the
[rs]N
escape sequence in
troff
to select the character,
even if the character does not have a groff name.
Every character in the font file must exist in the PostScript font, and
the widths given in the font file must match the widths used
in the PostScript font.
grops
will assume that a character with a groff name of
space
is blank (makes no marks on the page);
it can make use of such a character to generate more efficient and
compact PostScript output.
grops
can automatically include the downloadable fonts necessary
to print the document.
Any downloadable fonts which should, when required, be included by
grops
must be listed in the file
/usr/share/groff/1.18.1.1/font/devps/download;
this should consist of lines of the form
font filename
where
font
is the PostScript name of the font,
and
filename
is the name of the file containing the font;
lines beginning with
#
and blank lines are ignored;
fields may be separated by tabs or spaces;
filename
will be searched for using the same mechanism that is used
for groff font metric files.
The
download
file itself will also be searched for using this mechanism;
currently, only the first found file in the font path is used.
If the file containing a downloadable font or imported document
conforms to the Adobe Document Structuring Conventions,
then
grops
will interpret any comments in the files sufficiently to ensure that its
own output is conforming.
It will also supply any needed font resources that are listed in the
download
file
as well as any needed file resources.
It is also able to handle inter-resource dependencies.
For example, suppose that you have a downloadable font called Garamond,
and also a downloadable font called Garamond-Outline
which depends on Garamond
(typically it would be defined to copy Garamond's font dictionary,
and change the PaintType),
then it is necessary for Garamond to be appear before Garamond-Outline
in the PostScript document.
grops
will handle this automatically
provided that the downloadable font file for Garamond-Outline
indicates its dependence on Garamond by means of
the Document Structuring Conventions,
for example by beginning with the following lines
%!PS-Adobe-3.0 Resource-Font %%DocumentNeededResources: font Garamond %%EndComments %%IncludeResource: font Garamond
In this case both Garamond and Garamond-Outline would need to be listed
in the
download
file.
A downloadable font should not include its own name in a
%%DocumentSuppliedResources
comment.
grops
will not interpret
%%DocumentFonts
comments.
The
%%DocumentNeededResources,
%%DocumentSuppliedResources,
%%IncludeResource,
%%BeginResource
and
%%EndResource
comments
(or possibly the old
%%DocumentNeededFonts,
%%DocumentSuppliedFonts,
%%IncludeFont,
%%BeginFont
and
%%EndFont
comments)
should be used.
TrueType fonts
TrueType fonts can be used with
grops
if converted first to
Type 42
format, an especial PostScript wrapper equivalent to the
PFA format mentioned in
pfbtops(1).
There are several different methods to generate a type42
wrapper and most of them involve the use of a PostScript
interpreter such as Ghostscript --- see
gs(1).
Yet, the easiest method involves the use of the application
ttftot42.
This program uses
freetype(3)
(version 1.3.1) to generate type42
font wrappers and well-formed AFM files that can be fed to
the
afmtodit(1)
script to create appropriate metric files.
The resulting font wrappers should be added to the
download
file.
ttftot42
source code can be downloaded from
ENVIRONMENT
GROPS_PROLOGUE
If this is set to
foo,
then
grops
will use the file
foo
(in the font path) instead of the default prologue file
prologue.
The option
-P
overrides this environment variable.
