MySQL Instance Manager is included in MySQL distributions from version 5.0.3, and can be used in place of the mysqld_safe script to start and stop the MySQL Server, even from a remote host. MySQL Instance Manager also implements the functionality (and most of the syntax) of the mysqld_multi script. A more detailed description of MySQL Instance Manager follows.  

STARTING THE MYSQL SERVER WITH MYSQL INSTANCE MANAGER

Normally, the mysqld MySQL Database Server is started with the mysql.server script, which usually resides in the /etc/init.d/ folder. In MySQL 5.0.3, this script invokes mysqlmanager (the MySQL Instance Manager binary) to start MySQL. (In prior versions of MySQL the mysqld_safe script is used for this purpose.) Starting from MySQL 5.0.4, the behavior of the startup script was changed again to incorporate both setup schemes. In version 5.0.4, the startup script uses the old scheme (invoking mysqld_safe) by default, but one can set the use_mysqld_safe variable in the script to 0 (zero) to use the MySQL Instance Manager to start a server.

Starting with MySQL 5.0.19, you can instead modify the my.cnf file by adding use-manager to the [mysql.server] section:

[mysql.server]
use-manager

The Instance Manager's behavior in this case depends on the options given in the MySQL configuration file. If there is no configuration file, the MySQL Instance Manager creates a server instance named mysqld and attempts to start it with default (compiled-in) configuration values. This means that the IM cannot guess the placement of mysqld if it is not installed in the default location. If you have installed the MySQL server in a non-standard location, you should use a configuration file. See Section 1.5, lqInstallation Layoutsrq.

If there is a configuration file, the IM reads it to find [mysqldN] sections (for example, [mysqld1], [mysqld2], and so forth). Each such section specifies an instance. When it starts, the Instance Manager attempts to start all server instances that it finds. By default, the Instance Manager stops all server instances when it shuts down.

Warning

The [mysqld] section name causes unpredictable results when used in conjunction with the Instance Manager. When using the Instance Manager, check that no section is named [mysqld].

Note that there is a special --mysqld-path=path-to-mysqld-binary option that is recognized only by the IM. Use this variable to let the IM know where the mysqld binary resides. You should also set basedir and datadir options for the server.

The typical startup/shutdown cycle for a MySQL server with the MySQL Instance Manager enabled is as follows:

1.

The MySQL Instance Manager is started with /etc/init.d/mysql script.

2.

The MySQL Instance Manager starts all instances and monitors them.

3.

If a server instance fails the MySQL Instance Manager restarts it.

4.

If the MySQL Instance Manager is shut down (for instance with the /etc/init.d/mysql stop command), all instances are shut down by the MySQL Instance Manager.

CONNECTING TO THE MYSQL INSTANCE MANAGER AND CREATING USER ACCOUNTS

Communication with the MySQL Instance Manager is handled using the MySQL client-server protocol. As such, you can connect to the IM using the standard mysql client program, as well as the MySQL C API. The IM supports the version of the MySQL client-server protocol used by the client tools and libraries distributed along with MySQL 4.1 or later.  

Instance Manager Users and Passwords

The Instance Manager stores its user information in a password file. The default name of the password file is /etc/mysqlmanager.passwd.

Password entries have the following format:

petr:*35110DC9B4D8140F5DE667E28C72DD2597B5C848

If there are no entries in the /etc/mysqlmanager.passwd file, you cannot connect to the Instance Manager.

To generate a new entry, invoke Instance Manager with the --passwd option. Then the output can be appended to the /etc/mysqlmanager.passwd file to add a new user. Here is an example:

shell> mysqlmanager --passwd >> /etc/mysqlmanager.passwd
Creating record for new user.
Enter user name: mike
Enter password: password
Re-type password: password

The preceding command causes the following line to be added to /etc/mysqlmanager.passwd:

mike:*00A51F3F48415C7D4E8908980D443C29C69B60C9

Note

The Instance Manager must be restarted after adding/changing passwords.  

MySQL Server Accounts for Status Monitoring

To monitor server status, the MySQL Instance Manager will attempt to connect to the MySQL server instance at regular intervals using the MySQL_Instance_Manager@localhost user account with a password of check_connection.

You are not required to create a MySQL_Instance_M@localhost user account in order for the MySQL Instance Manager to monitor server status, as a login failure is sufficient to identify that the server is operational. However, if the account does not exist, failed connection attempts are logged by the server to its general query log (see Section 10.2, lqThe General Query Logrq).  

MYSQL INSTANCE MANAGER COMMAND OPTIONS

The MySQL Instance Manager supports a number of command line options. For a brief listing, invoke mysqlmanager with the --help option.

mysqlmanager supports the following options:

*

--help, -?

Display a help message and exit.

*

--angel-pid-file=file_name

The file in which the angel process records its process ID when mysqlmanager runs in daemon mode. By default, this file is named mysqlmanager.angel.pid. If the --pid-file option is given, the default angel PID file becomes the same except that any extension is replaced with an extension of .angel.pid. This option was added in MySQL 5.0.23.

*

--bind-address=IP

The IP address to bind to.

*

--default-mysqld-path=path

On Unix, the pathname of the MySQL Server binary, if no path was provided in the instance section. Example: --default-mysqld-path=/usr/sbin/mysqld

*

--defaults-file=file_name

Read Instance Manager and MySQL Server settings from the given file. All configuration changes by the Instance Manager will be made to this file. This must be the first option on the command line if it is used.

*

--install

On Windows, install Instance Manager as a Windows service. This option was added in MySQL 5.0.11.

*

--log=file_name

The path to the IM log file. This is used with the --run-as-service option.

*

--monitoring-interval=seconds

The interval in seconds for monitoring instances. The default value is 20 seconds. Instance Manager tries to connect to each monitored instance using the non-existing MySQL_Instance_Manager user account to check whether it is alive/not hanging. In the case of a failure to connect, IM performs several attempts to restart the instance. The nonguarded option in the appropriate instance section disables this behavior for a particular instance. The monitoring process will produce messages in the general query log similar to the following:

Access denied for user 'MySQL_Instance_M'@'localhost' (using password: YES)

*

--passwd, -P

Prepare an entry for the password file and exit.

*

--password-file=file_name

Look for the Instance Manager users and passwords in this file. The default file is /etc/mysqlmanager.passwd.

*

--pid-file=file_name

The process ID file to use. By default, this file is named mysqlmanager.pid.

*

--port=port_num

The TCP/IP port number to use for incoming connections. (The default port number assigned by IANA is 2273).

*

--print-defaults

Print the current defaults and exit. This must be the first option on the command line if it is used.

*

--remove

On Windows, removes Instance Manager as a Windows service. This assumes that Instance Manager has been run with --install previously. This option was added in MySQL 5.0.11.

*

--run-as-service

On Unix, daemonize and start the angel process. The angel process is simple and unlikely to crash. It will restart the Instance Manager itself in case of a failure.

*

--socket=path

On Unix, the socket file to use for incoming connections. By default, the file is named /tmp/mysqlmanager.sock.

*

--standalone

On Windows, run Instance Manager in standalone mode. This option was added in MySQL 5.0.13.

*

--user=user_name

On Unix, the username to start and run the mysqlmanager under. It is recommended to run mysqlmanager under the same user account used to run the mysqld server. (lqUserrq in this context refers to a system login account, not a MySQL user listed in the grant tables.)

*

--version, -V

Output version information and exit.

*

--wait-timeout=N

The number of seconds to wait for activity on a connection befoe closing it. The default is 28800 seconds (8 hours).

This option was added in MySQL 5.0.19. Before that, the timeout is 30 seconds and cannot be changed.

MYSQL INSTANCE MANAGER CONFIGURATION FILES

Instance Manager uses the standard my.cnf file. It uses the [manager] section to read options for itself and the [mysqldN] sections to create instances. The [manager] section contains any of the options listed in the section called lqMYSQL INSTANCE MANAGER COMMAND OPTIONSrq. Here is an example [manager] section:

# MySQL Instance Manager options section
[manager]
default-mysqld-path = /usr/local/mysql/libexec/mysqld
socket=/tmp/manager.sock
pid-file=/tmp/manager.pid
password-file = /home/cps/.mysqlmanager.passwd
monitoring-interval = 2
port = 1999
bind-address = 192.168.1.5

Warning

The [mysqld] section name is deprecated and should not be used in a configuration file, instead [mysqldN] sections such as [mysqld1] should be used for specific instances.

Prior to MySQL 5.0.10, the MySQL Instance Manager read the same configuration files as the MySQL Server, including /etc/my.cnf, ~/.my.cnf, etc. As of MySQL 5.0.10, the MySQL Instance Manager reads and manages the /etc/my.cnf file only on Unix. On Windows, MySQL Instance Manager reads the my.ini file in the directory where Instance Manager is installed. The default option file location can be changed with the --defaults-file=file_name option.

Instance sections specify options given to each instance at startup. These are mainly common MySQL server options, but there are some IM-specific options:

*

mysqld-path = path

The pathname to the mysqld server binary.

*

shutdown-delay = seconds

The number of seconds IM should wait for the instance to shut down. The default value is 35 seconds. After the delay expires, the IM assumes that the instance is hanging and attempts to terminate it. If you use InnoDB with large tables, you should increase this value.

*

nonguarded

This option should be specified if you want to disable IM monitoring functionality for a certain instance.

Here are some sample instance sections:

[mysqld1]
mysqld-path=/usr/local/mysql/libexec/mysqld
socket=/tmp/mysql.sock
port=3307
server_id=1
skip-stack-trace
core-file
skip-bdb
log-bin
log-error
log=mylog
log-slow-queries
[mysqld2]
nonguarded
port=3308
server_id=2
mysqld-path= /home/cps/mysql/trees/mysql-5.0/sql/mysqld
socket     = /tmp/mysql.sock5
pid-file   = /tmp/hostname.pid5
datadir= /home/cps/mysql_data/data_dir1
language=/home/cps/mysql/trees/mysql-5.0/sql/share/english
log-bin
log=/tmp/fordel.log

COMMANDS RECOGNIZED BY THE MYSQL INSTANCE MANAGER

Once you've set up a password file for the MySQL Instance Manager and the IM is running, you can connect to it. You can use the mysql client tool connect through a standard MySQL API:

mysql --port=2273 --host=mydomain.org --user=mysql -p

The following list of commands shows the MySQL Instance Manager currently accepts, with samples.

*

START INSTANCE instance_name

This command attempts to start an instance.

mysql> START INSTANCE mysqld4;
Query OK, 0 rows affected (0,00 sec)

*

STOP INSTANCE instance_name

This command attempts to stop an instance.

mysql> STOP INSTANCE mysqld4;
Query OK, 0 rows affected (0,00 sec)

*

SHOW INSTANCES

Shows the names of all loaded instances.

mysql> SHOW INSTANCES;
+---------------+---------+
| instance_name | status  |
+---------------+---------+
| mysqld3       | offline |
| mysqld4       | online  |
| mysqld2       | offline |
+---------------+---------+
3 rows in set (0,04 sec)

*

SHOW INSTANCE STATUS instance_name

Shows the status and the version information for an instance.

mysql> SHOW INSTANCE STATUS mysqld3;
+---------------+--------+---------+
| instance_name | status | version |
+---------------+--------+---------+
| mysqld3       | online | unknown |
+---------------+--------+---------+
1 row in set (0.00 sec)

*

SHOW INSTANCE OPTIONS instance_name

Shows the options used by an instance.

mysql> SHOW INSTANCE OPTIONS mysqld3;
+---------------+---------------------------------------------------+
| option_name   | value                                             |
+---------------+---------------------------------------------------+
| instance_name | mysqld3                                           |
| mysqld-path   | /home/cps/mysql/trees/mysql-4.1/sql/mysqld        |
| port          | 3309                                              |
| socket        | /tmp/mysql.sock3                                  |
| pid-file      | hostname.pid3                                     |
| datadir       | /home/cps/mysql_data/data_dir1/                   |
| language      | /home/cps/mysql/trees/mysql-4.1/sql/share/english |
+---------------+---------------------------------------------------+
7 rows in set (0.01 sec)

*

SHOW instance_name LOG FILES

The command lists all log files used by the instance. The result set contains the path to the log file and the log file size. If no log file path is specified in the configuration file (for example, log=/var/mysql.log), the Instance Manager tries to guess its placement. If the IM is unable to guess the logfile placement you should specify the log file location explicitly by using the appropriate log option in the instance section of the configuration file.

mysql> SHOW mysqld LOG FILES;
+-------------+------------------------------------+----------+
| Logfile     | Path                               | Filesize |
+-------------+------------------------------------+----------+
| ERROR LOG   | /home/cps/var/mysql/owlet.err      | 9186     |
| GENERAL LOG | /home/cps/var/mysql/owlet.log      | 471503   |
| SLOW LOG    | /home/cps/var/mysql/owlet-slow.log | 4463     |
+-------------+------------------------------------+----------+
3 rows in set (0.01 sec)

*

SHOW instance_name LOG {ERROR | SLOW | GENERAL} size[,offset_from_end]

This command retrieves a portion of the specified log file. Because most users are interested in the latest log messages, the size parameter defines the number of bytes you would like to retrieve starting from the log end. You can retrieve data from the middle of the log file by specifying the optional offset_from_end parameter. The following example retrieves 21 bytes of data, starting 23 bytes from the end of the log file and ending 2 bytes from the end of the log file:

mysql> SHOW mysqld LOG GENERAL 21, 2;
+---------------------+
| Log                 |
+---------------------+
| using password: YES |
+---------------------+
1 row in set (0.00 sec)

*

SET instance_name.option_name=option_value

This command edits the specified instance's configuration file to change or add instance options. The IM assumes that the configuration file is located at /etc/my.cnf. You should check that the file exists and has appropriate permissions.

mysql> SET mysqld2.port=3322;
Query OK, 0 rows affected (0.00 sec)

Changes made to the configuration file do not take effect until the MySQL server is restarted. In addition, these changes are not stored in the instance manager's local cache of instance settings until a FLUSH INSTANCES command is executed.

*

UNSET instance_name.option_name

This command removes an option from an instance's configuration file.

mysql> UNSET mysqld2.port;
Query OK, 0 rows affected (0.00 sec)

Changes made to the configuration file do not take effect until the MySQL server is restarted. In addition, these changes are not stored in the instance manager's local cache of instance settings until a FLUSH INSTANCES command is executed.

*

FLUSH INSTANCES

This command forces IM to reread the configuration file and to refresh internal structures. This command should be performed after editing the configuration file. The command does not restart instances.

mysql> FLUSH INSTANCES;
Query OK, 0 rows affected (0.04 sec)

SEE ALSO

AUTHOR

Index

NAME

SYNOPSIS

DESCRIPTION

STARTING THE MYSQL SERVER WITH MYSQL INSTANCE MANAGER

CONNECTING TO THE MYSQL INSTANCE MANAGER AND CREATING USER ACCOUNTS

Instance Manager Users and Passwords

MySQL Server Accounts for Status Monitoring

MYSQL INSTANCE MANAGER COMMAND OPTIONS

MYSQL INSTANCE MANAGER CONFIGURATION FILES

COMMANDS RECOGNIZED BY THE MYSQL INSTANCE MANAGER

SEE ALSO

AUTHOR

Партнёры:

Хостинг: