Интерактивная система просмотра системных руководств (man-ов)
tiffcp (1)
tiffcp (1) ( Solaris man: Команды и прикладные программы пользовательского уровня )
>> tiffcp (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
NAME
tiffcp - copy (and possibly convert) a
TIFF
file
SYNOPSIS
tiffcp
[
options
]
src1.tif ... srcN.tif dst.tif
DESCRIPTION
tiffcp
combines one or more files created according
to the Tag Image File Format, Revision 6.0
into a single
TIFF
file.
Because the output file may be compressed using a different
algorithm than the input files,
tiffcp
is most often used to convert between different compression
schemes.
By default,
tiffcp
will copy all the understood tags in a
TIFF
directory of an input
file to the associated directory in the output file.
tiffcp
can be used to reorganize the storage characteristics of data
in a file, but it is explicitly intended to not alter or convert
the image data content in any way.
OPTIONS
-b image
subtract the following monochrome image from all others
processed. This can be used to remove a noise bias
from a set of images. This bias image is typically an
image of noise the camera saw with its shutter closed.
-B
Force output to be written with Big-Endian byte order.
This option only has an effect when the output file is created or
overwritten and not when it is appended to.
-C
Suppress the use of ``strip chopping'' when reading images
that have a single strip/tile of uncompressed data.
-c
Specify the compression to use for data written to the output file:
none
for no compression,
packbits
for PackBits compression,
lzw
for Lempel-Ziv & Welch compression,
jpeg
for baseline JPEG compression,
zip
for Deflate compression,
g3
for CCITT Group 3 (T.4) compression,
and
g4
for CCITT Group 4 (T.6) compression.
By default
tiffcp
will compress data according to the value of the
Compression
tag found in the source file.
The
CCITT
Group 3 and Group 4 compression algorithms can only
be used with bilevel data.
Group 3 compression can be specified together with several
T.4-specific options:
1d
for 1-dimensional encoding,
2d
for 2-dimensional encoding,
and
fill
to force each encoded scanline to be zero-filled so that the
terminating EOL code lies on a byte boundary.
Group 3-specific options are specified by appending a ``:''-separated
list to the ``g3'' option; e.g.
-c g3:2d:fill
to get 2D-encoded data with byte-aligned EOL codes.
LZW
compression can be specified together with a
predictor
value.
A predictor value of 2 causes
each scanline of the output image to undergo horizontal
differencing before it is encoded; a value
of 1 forces each scanline to be encoded without differencing.
LZW-specific options are specified by appending a ``:''-separated
list to the ``lzw'' option; e.g.
-c lzw:2
for
LZW
compression with horizontal differencing.
-f
Specify the bit fill order to use in writing output data.
By default,
tiffcp
will create a new file with the same fill order as the original.
Specifying
-f lsb2msb
will force data to be written with the FillOrder tag set to
LSB2MSB,
while
-f msb2lsb
will force data to be written with the FillOrder tag set to
MSB2LSB.
-l
Specify the length of a tile (in pixels).
tiffcp
attempts to set the tile dimensions so
that no more than 8 kilobytes of data appear in a tile.
-L
Force output to be written with Little-Endian byte order.
This option only has an effect when the output file is created or
overwritten and not when it is appended to.
-M
Suppress the use of memory-mapped files when reading images.
-p
Specify the planar configuration to use in writing image data
that has one 8-bit sample per pixel.
By default,
tiffcp
will create a new file with the same planar configuration as
the original.
Specifying
-p contig
will force data to be written with multi-sample data packed
together, while
-p separate
will force samples to be written in separate planes.
-r
Specify the number of rows (scanlines) in each strip of data
written to the output file.
By default (or when value
0
is specified),
tiffcp
attempts to set the rows/strip
that no more than 8 kilobytes of data appear in a strip. If you specify
special value
-1
it will results in infinite number of the rows per strip. The entire image
will be the one strip in that case.
-s
Force the output file to be written with data organized in strips
(rather than tiles).
-t
Force the output file to be written with data organized in tiles
(rather than strips).
options can be used to force the resultant image to be written
as strips or tiles of data, respectively.
-w
Specify the width of a tile (in pixels).
tiffcp
attempts to set the tile dimensions so
that no more than 8 kilobytes of data appear in a tile.
tiffcp
attempts to set the tile dimensions so
that no more than 8 kilobytes of data appear in a tile.
-,={character}
substitute {character} for ',' in parsing image directory indices
in files. This is necessary if filenames contain commas.
Note that ',=' with whitespace immediately following will disable
the special meaning of the ',' entirely. See examples.
EXAMPLES
The following concatenates two files and writes the result using
LZW
encoding:
tiffcp -c lzw a.tif b.tif result.tif
To convert a G3 1d-encoded
TIFF
to a single strip of G4-encoded data the following might be used:
tiffcp -c g4 -r 10000 g3.tif g4.tif
(1000 is just a number that is larger than the number of rows in
the source file.)
To extract a selected set of images from a multi-image
TIFF file, the file name may be immediately followed by a ','
separated list of image directory indices. The first image
is always in directory 0. Thus, to copy the 1st and 3rd
images of image file "album.tif" to "result.tif":
tiffcp album.tif,0,2 result.tif
Given file "CCD.tif" whose first image is a noise bias
followed by images which include that bias,
subtract the noise from all those images following it
(while decompressing) with the command:
tiffcp -c none -b CCD.tif CCD.tif,1, result.tif
If the file above were named "CCD,X.tif", the "-,=" option would
be required to correctly parse this filename with image numbers,
as follows:
