[ новости /+++ | форум | теги | ]

NAME

gimp - an image manipulation and paint program.


 

SYNOPSIS

DESCRIPTION

GIMP is the GNU Image Manipulation Program. It is used to edit and manipulate images. It can load and save a variety of image formats and can be used to convert between formats.

GIMP can also be used as a paint program. It features a set of drawing and painting tools such as airbrush, clone, pencil, and paint brush. Painting and drawing tools can be applied to an image with a variety of paint modes. It also offers an extensive array of selection tools like rectangle, ellipse, fuzzy select, bezier select, intelligent scissors, and select by color.

GIMP offers a variety of plug-ins that perform a variety of image manipulations. Examples include bumpmap, edge detect, gaussian blur, and many others. In addition, GIMP has several scripting extension which allow for advanced non-interactive processing and creation of images.

GIMP ships with a second binary called gimp-console. This binary is a console-only version and behaves as if gimp was called with the --no-interface command-line option.

On platforms with the D-Bus message bus system, GIMP will by default check if an instance is already running in this user session. If it detects that, it will pass all filenames given on the command-line to the already running GIMP instance and quit.

OPTIONS

-h, --help

Show GIMP command-line options.

--help-all

Show all command-line options.

--help-gtk

Show GTK+ command-line options.

-v, --version

Output version information and exit.

--license

Output license information and exit.

--verbose

Be verbose and create information on standard output.

-n, --new-instance

Do not attempt to reuse an already running GIMP instance. Always start a new one.

-a, --as-new

Open filenames passed on the command-line as new images, don't set the filename on them.

-i, --no-interface

Run without a user interface.

-d, --no-data

Do not load patterns, gradients, palettes, or brushes. Often useful in non-interactive situations where startup time is to be minimized.

-f, --no-fonts

Do not load any fonts. No text functionality will be available if this option is used.

--display display

Use the designated X display.

-s, --no-splash

Do not show the splash screen.

--no-shm

Do not use shared memory between GIMP and its plug-ins. Instead of using shared memory, GIMP will send the data via pipe. This will result in slower performance than using shared memory.

--no-cpu-accel

Do not use CPU accelerations such as MMX or SSE even if GIMP detects that your CPU provides this functionality.

--session <name>

Use a different sessionrc for this GIMP session. The given session name is appended to the default sessionrc filename.

-g, --gimprc <gimprc>

Use an alternative gimprc instead of the default one. Useful in cases where plug-in paths or machine specs may be different.

--system-gimprc <gimprc>

Use an alternate system gimprc file.

--dump-gimprc

Output a gimprc file with default settings.

--debug-handlers

Enable debugging signal handlers.

-c, --console-messages

Do not popup dialog boxes on errors or warnings. Print the messages on the console instead.

--stack-trace-mode {never|query|always}

If a stack-trace should be generated in case of fatal signals.

--pdb-compat-mode {off|on|warn}

If the PDB should provide aliases for deprecated functions.

--batch-interpreter <procedure>

Specifies the procedure to use to process batch events. The default is to let Script-Fu evaluate the commands.

-b, --batch <command>

Execute <command> non-interactively. This option may appear multiple times. The <command> is passed to the batch interpreter. When <command> is - the commands are read from standard input.

ENVIRONMENT

DISPLAY

to get the default host and display number.

GIMP2_DIRECTORY

to get the name of the personal GIMP directory. If unset .gimp-2.4 is used. If this is an absolute path, it is used as is. If it is a relative path, it is taken to be a subdirectory of the home directory.

GIMP2_DATADIR

to get the base location for data files such as brushes and patterns. If unset ${datarootdir}/gimp/2.0 is used.

GIMP2_LOCALEDIR

to get the base location for translations. If unset ${datarootdir}/locale is used.

GIMP2_PLUGINDIR

to get the base location for plug-ins and modules. If unset ${exec_prefix}/lib/gimp/2.0 is used.

GIMP2_SYSCONFDIR

to get the location of configuration files. If unset /etc/gimp/2.0 is used.

On Linux GIMP can be compiled with support for binary relocatibility. This will cause data, plug-ins and configuration files to be searched relative to the location of the gimp executable file unless overridden by the environment variables mentioned above.

FILES

Most GIMP configuration is read in from the user's init file, $HOME/.gimp-2.4/gimprc. The system wide equivalent is in /etc/gimprc. The system wide file is parsed first and the user gimprc can override the system settings. /etc/gimprc_user is the default gimprc placed in users' home directories the first time GIMP is run.

$HOME/.gimp-2.4/devicerc - holds settings for input devices together with the tool, colors, brush, pattern and gradient associated to that device.

$HOME/.gimp-2.4/documents - lists all images that have been opened or saved using GIMP.

$HOME/.gimp-2.4/gtkrc - users set of GIMP-specific GTK config settings. Options such as widget color and fonts sizes can be set here.

/etc/gimp/2.0/gtkrc - sytem wide default set of GIMP-specific GTK+ config settings.

$HOME/.gimp-2.4/menurc - user's set of keybindings.

$HOME/.gimp-2.4/parasiterc - Stores all persistent GIMP parasites. This file will be rewritten every time you quit GIMP.

$HOME/.gimp-2.4/sessionrc - This file takes session-specific info (that is info, you want to keep between two GIMP sessions). You are not supposed to edit it manually, but of course you can do. This file will be entirely rewritten every time you quit GIMP. If this file isn't found, defaults are used.

$HOME/.gimp-2.4/templaterc - Image templates are kept in this file. New images can conveniently created from these templates. If this file isn't found, defaults are used.

/etc/gimp/2.0/unitrc - default user unit database. It contains the unit definitions for centimeters, meters, feet, yards, typographic points and typographic picas and is placed in users home directories the first time GIMP is ran. If this file isn't found, defaults are used.

$HOME/.gimp-2.4/unitrc - This file contains your user unit database. You can modify this list with the unit editor. You are not supposed to edit it manually, but of course you can do. This file will be entirely rewritten every time you quit GIMP.

$HOME/.gimp-2.4/plug-ins - location of user installed plug-ins.

$HOME/.gimp-2.4/pluginrc - plug-in initialization values are stored here. This file is parsed on startup and regenerated if need be.

$HOME/.gimp-2.4/modules - location of user installed modules.

$HOME/.gimp-2.4/tmp - default location that GIMP uses as temporary space.

${datarootdir}/gimp/2.0/brushes - system wide brush files.

$HOME/.gimp-2.4/brushes - user created and installed brush files. These files are in the .gbr, .gih or .vbr file formats.

$HOME/.gimp-2.4/curves - Curve profiles and presets as saved from the Curves tool.

$HOME/.gimp-2.4/gimpressionist - Presets and user created brushes and papers are stored here.

$HOME/.gimp-2.4/levels - Level profiles and presets as saved from the Levels tool.

${datarootdir}/gimp/2.0/palettes - the system wide palette files.

$HOME/.gimp-2.4/palettes - user created and modified palette files. This files are in the .gpl format.

${datarootdir}/gimp/2.0/patterns - basic set of patterns for use in GIMP.

$HOME/.gimp-2.4/patterns - user created and installed gimp pattern files. This files are in the .pat format.

${datarootdir}/gimp/2.0/gradients - standard system wide set of gradient files.

$HOME/.gimp-2.4/gradients - user created and installed gradient files.

${datarootdir}/gimp/2.0/scripts - system wide directory of scripts used in Script-Fu and other scripting extensions.

$HOME/.gimp-2.4/scripts - user created and installed scripts.

${datarootdir}/gimp/2.0/gflares - system wide directory used by the gflare plug-in.

$HOME/.gimp-2.4/gflares - user created and installed gflare files.

${datarootdir}/gimp/2.0/gfig - system wide directory used by the gfig plug-in.

$HOME/.gimp-2.4/gfig - user created and installed gfig files.

${datarootdir}/gimp/2.0/images/gimp-splash.png - the default image used for the GIMP splash screen.

${datarootdir}/gimp/2.0/images/gimp-logo.png - image used in the GIMP about dialog.

${datarootdir}/gimp/2.0/tips/gimp-tips.xml - tips as displayed in the "Tip of the Day" dialog box.

SPLASH IMAGES

1.

GIMP tries to load a random splash screen from the directory $HOME/.gimp-2.4/splashes.

2.

It then falls back to using $HOME/.gimp-2.4/gimp-splash.png.

3.

If the user didn't install any custom splash images, a random image is picked from ${datarootdir}/gimp/2.0/splashes.

4.

As a last resort, GIMP uses the default splash image located at ${datarootdir}/gimp/2.0/images/gimp-splash.png.

SUGGESTIONS AND BUG REPORTS

When reporting GIMP bugs, it is important to include a reliable way to reproduce the bug, version number of GIMP (and probably GTK), OS name and version, and any relevant hardware specs. If a bug is causing a crash, it is very useful if a stack trace can be provided. And of course, patches to rectify the bug are even better.

OTHER INFO

There is also a GIMP User Manual available at http://docs.gimp.org/ that goes into much more detail about the interactive use of GIMP.

The latest version of GIMP and the GTK+ libs is always available at ftp://ftp.gimp.org/.

AUTHORS

With patches, fixes, plug-ins, extensions, scripts, translations, documentation and more from lots and lots of people all over the world.

SEE ALSO

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

ENVIRONMENT

FILES

SPLASH IMAGES

SUGGESTIONS AND BUG REPORTS

OTHER INFO

AUTHORS

SEE ALSO

Партнёры:

Хостинг: