Партнёры:
Хостинг:
perlfaq8 - System Interaction ($Revision: 1.27 $, $Date: 2005/12/31 00:54:37 $)
Read the FAQs and documentation specific to the port of perl to your operating system (eg, perlvms, perlplan9, ...). These should contain more detailed information on the vagaries of your perl.
Term::Cap Standard perl distribution
Term::ReadKey CPAN
Term::ReadLine::Gnu CPAN
Term::ReadLine::Perl CPAN
Term::Screen CPAN
Term::Cap Standard perl distribution
Curses CPAN
Term::ANSIColor CPAN
Tk CPAN
Some of these specific cases are shown as examples in other answers in this section of the perlfaq.
use Term::ANSIColor;
print color("red"), "Stop!\n", color("reset");
print color("green"), "Go!\n", color("reset");
Or like this:
use Term::ANSIColor qw(:constants);
print RED, "Stop!\n", RESET;
print GREEN, "Go!\n", RESET;
open(TTY, "+</dev/tty") or die "no tty: $!";
system "stty cbreak </dev/tty >/dev/tty 2>&1";
$key = getc(TTY); # perhaps this works
# OR ELSE
sysread(TTY, $key, 1); # probably this does
system "stty -cbreak </dev/tty >/dev/tty 2>&1";
The Term::ReadKey module from CPAN offers an easy-to-use interface that should be more efficient than shelling out to stty for each key. It even includes limited support for Windows.
use Term::ReadKey;
ReadMode('cbreak');
$key = ReadKey(0);
ReadMode('normal');
However, using the code requires that you have a working C compiler and can use it to build and install a CPAN module. Here's a solution using the standard POSIX module, which is already on your systems (assuming your system supports POSIX).
use HotKey;
$key = readkey();
And here's the HotKey module, which hides the somewhat mystifying calls to manipulate the POSIX termios structures.
# HotKey.pm
package HotKey;
@ISA = qw(Exporter);
@EXPORT = qw(cbreak cooked readkey);
use strict;
use POSIX qw(:termios_h);
my ($term, $oterm, $echo, $noecho, $fd_stdin);
$fd_stdin = fileno(STDIN);
$term = POSIX::Termios->new();
$term->getattr($fd_stdin);
$oterm = $term->getlflag();
$echo = ECHO | ECHOK | ICANON;
$noecho = $oterm & ~$echo;
sub cbreak {
$term->setlflag($noecho); # ok, so i don't want echo either
$term->setcc(VTIME, 1);
$term->setattr($fd_stdin, TCSANOW);
}
sub cooked {
$term->setlflag($oterm);
$term->setcc(VTIME, 0);
$term->setattr($fd_stdin, TCSANOW);
}
sub readkey {
my $key = '';
cbreak();
sysread(STDIN, $key, 1);
cooked();
return $key;
}
END { cooked() }
1;
use Term::ReadKey;
ReadMode('cbreak');
if (defined ($char = ReadKey(-1)) ) {
# input was waiting and it was $char
} else {
# no input was waiting
}
ReadMode('normal'); # restore normal tty settings
system("clear");
If you have to do this a lot, save the clear string so you can print it 100 times without calling a program 100 times:
$clear_string = `clear`;
print $clear_string;
If you're planning on doing other screen manipulations, like cursor positions, etc, you might wish to use Term::Cap module:
use Term::Cap;
$terminal = Term::Cap->Tgetent( {OSPEED => 9600} );
$clear_string = $terminal->Tputs('cl');
use Term::ReadKey;
($wchar, $hchar, $wpixels, $hpixels) = GetTerminalSize();
This is more portable than the raw "ioctl", but not as illustrative:
require 'sys/ioctl.ph';
die "no TIOCGWINSZ " unless defined &TIOCGWINSZ;
open(TTY, "+</dev/tty") or die "No tty: $!";
unless (ioctl(TTY, &TIOCGWINSZ, $winsize='')) {
die sprintf "$0: ioctl TIOCGWINSZ (%08x: $!)\n", &TIOCGWINSZ;
}
($row, $col, $xpixel, $ypixel) = unpack('S4', $winsize);
print "(row,col) = ($row,$col)";
print " (xpixel,ypixel) = ($xpixel,$ypixel)" if $xpixel || $ypixel;
print "\n";
There's an example of this in ``crypt'' in perlfunc). First, you put the terminal into ``no echo'' mode, then just read the password normally. You may do this with an old-style ioctl() function, POSIX terminal control (see POSIX or its documentation the Camel Book), or a call to the stty program, with varying degrees of portability.
You can also do this for most systems using the Term::ReadKey module from CPAN, which is easier to use and in theory more portable.
use Term::ReadKey;
ReadMode('noecho');
$password = ReadLine(0);
print DEV "atv1\012"; # wrong, for some devices
print DEV "atv1\015"; # right, for some devices
Even though with normal text files a ``\n'' will do the trick, there is still no unified scheme for terminating a line that is portable between Unix, DOS/Win, and Macintosh, except to terminate ALL line ends with ``\015\012'', and strip what you don't need from the output. This applies especially to socket I/O and autoflushing, discussed next.
$oldh = select(DEV);
$| = 1;
select($oldh);
You'll also see code that does this without a temporary variable, as in
select((select(DEV), $| = 1)[0]);
Or if you don't mind pulling in a few thousand lines of code just because you're afraid of a little $| variable:
use IO::Handle;
DEV->autoflush(1);
As mentioned in the previous item, this still doesn't work when using socket I/O between Unix and Macintosh. You'll need to hard code your line terminators, in that case.
While trying to read from his caller-id box, the notorious Jamie Zawinski <jwz@netscape.com>, after much gnashing of teeth and fighting with sysread, sysopen, POSIX's tcgetattr business, and various other functions that go bump in the night, finally came up with this:
sub open_modem {
use IPC::Open2;
my $stty = `/bin/stty -g`;
open2( \*MODEM_IN, \*MODEM_OUT, "cu -l$modem_device -s2400 2>&1");
# starting cu hoses /dev/tty's stty settings, even when it has
# been opened on a pipe...
system("/bin/stty $stty");
$_ = <MODEM_IN>;
chomp;
if ( !m/^Connected/ ) {
print STDERR "$0: cu printed `$_' instead of `Connected'\n";
}
}
Seriously, you can't if they are Unix password files---the Unix password system employs one-way encryption. It's more like hashing than encryption. The best you can check is whether something else hashes to the same string. You can't turn a hash back into the original string. Programs like Crack can forcibly (and intelligently) try to guess passwords, but don't (can't) guarantee quick success.
If you're worried about users selecting bad passwords, you should proactively check when they try to change their password (by modifying passwd(1), for example).
You could also use
system("cmd &")
or you could use fork as documented in ``fork'' in perlfunc, with further examples in perlipc. Some things to be aware of, if you're on a Unix-like system:
$SIG{CHLD} = sub { wait };
$SIG{CHLD} = 'IGNORE';
You can also use a double fork. You immediately wait() for your first child, and the init daemon will wait() for your grandchild once it exits.
unless ($pid = fork) {
unless (fork) {
exec "what you really wanna do";
die "exec failed!";
}
exit 0;
}
waitpid($pid,0);
See ``Signals'' in perlipc for other examples of code to do this. Zombies are not an issue with "system("prog &")".
You can set the values of the %SIG hash to be the functions you want to handle the signal. After perl catches the signal, it looks in %SIG for a key with the same name as the signal, then calls the subroutine value for that key.
# as an anonymous subroutine
$SIG{INT} = sub { syswrite(STDERR, "ouch\n", 5 ) };
# or a reference to a function
$SIG{INT} = \&ouch;
# or the name of the function as a string
$SIG{INT} = "ouch";
Perl versions before 5.8 had in its C source code signal handlers which would catch the signal and possibly run a Perl function that you had set in %SIG. This violated the rules of signal handling at that level causing perl to dump core. Since version 5.8.0, perl looks at %SIG *after* the signal has been caught, rather than while it is being caught. Previous versions of this answer were incorrect.
However, if all you want to do is change your time zone, you can probably get away with setting an environment variable:
$ENV{TZ} = "MST7MDT"; # unixish
$ENV{'SYS$TIMEZONE_DIFFERENTIAL'}="-5" # vms
system "trn comp.lang.perl.misc";
If your system supports both the syscall() function in Perl as well as a system call like gettimeofday(2), then you may be able to do something like this:
require 'sys/syscall.ph';
$TIMEVAL_T = "LL";
$done = $start = pack($TIMEVAL_T, ());
syscall(&SYS_gettimeofday, $start, 0) != -1
or die "gettimeofday: $!";
##########################
# DO YOUR OPERATION HERE #
##########################
syscall( &SYS_gettimeofday, $done, 0) != -1
or die "gettimeofday: $!";
@start = unpack($TIMEVAL_T, $start);
@done = unpack($TIMEVAL_T, $done);
# fix microseconds
for ($done[1], $start[1]) { $_ /= 1_000_000 }
$delta_time = sprintf "%.4f", ($done[0] + $done[1] )
-
($start[0] + $start[1] );
For example, you can use this to make sure your filter program managed to finish its output without filling up the disk:
END {
close(STDOUT) || die "stdout close failed: $!";
}
The END block isn't called when untrapped signals kill the program, though, so if you use END blocks you should also use
use sigtrap qw(die normal-signals);
Perl's exception-handling mechanism is its eval() operator. You can use eval() as setjmp and die() as longjmp. For details of this, see the section on signals, especially the time-out handler for a blocking flock() in ``Signals'' in perlipc or the section on ``Signals'' in the Camel Book.
If exception handling is all you're interested in, try the exceptions.pl library (part of the standard perl distribution).
If you want the atexit() syntax (and an rmexit() as well), try the AtExit module available from CPAN.
Note that even though SunOS and Solaris are binary compatible, these values are different. Go figure.
Remember to check the modules that came with your distribution, and CPAN as well---someone may already have written a module to do it. On Windows, try Win32::API. On Macs, try Mac::Carbon. If no module has an interface to the C function, you can inline a bit of C in your Perl source with Inline::C.
1. become super-user
2. cd /usr/include
3. h2ph *.h */*.h
If your system supports dynamic loading, for reasons of portability and sanity you probably ought to use h2xs (also part of the standard perl distribution). This tool converts C header files to Perl extensions. See perlxstut for how to get started with h2xs.
If your system doesn't support dynamic loading, you still probably ought to use h2xs. See perlxstut and ExtUtils::MakeMaker for more information (in brief, just use make perl instead of a plain make to rebuild perl with a new static extension).
You may also use the IPC::Open3 module (part of the standard perl distribution), but be warned that it has a different order of arguments from IPC::Open2 (see IPC::Open3).
$exit_status = system("mail-users");
$output_string = `ls`;
system $cmd; # using system()
$output = `$cmd`; # using backticks (``)
open (PIPE, "cmd |"); # using open()
With system(), both STDOUT and STDERR will go the same place as the script's STDOUT and STDERR, unless the system() command redirects them. Backticks and open() read only the STDOUT of your command.
You can also use the open3() function from IPC::Open3. Benjamin Goldberg provides some sample code:
To capture a program's STDOUT, but discard its STDERR:
use IPC::Open3;
use File::Spec;
use Symbol qw(gensym);
open(NULL, ">", File::Spec->devnull);
my $pid = open3(gensym, \*PH, ">&NULL", "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, but discard its STDOUT:
use IPC::Open3;
use File::Spec;
use Symbol qw(gensym);
open(NULL, ">", File::Spec->devnull);
my $pid = open3(gensym, ">&NULL", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To capture a program's STDERR, and let its STDOUT go to our own STDERR:
use IPC::Open3;
use Symbol qw(gensym);
my $pid = open3(gensym, ">&STDERR", \*PH, "cmd");
while( <PH> ) { }
waitpid($pid, 0);
To read both a command's STDOUT and its STDERR separately, you can redirect them to temp files, let the command run, then read the temp files:
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
local *CATCHOUT = IO::File->new_tmpfile;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, ">&CATCHOUT", ">&CATCHERR", "cmd");
waitpid($pid, 0);
seek $_, 0, 0 for \*CATCHOUT, \*CATCHERR;
while( <CATCHOUT> ) {}
while( <CATCHERR> ) {}
But there's no real need for *both* to be tempfiles... the following should work just as well, without deadlocking:
use IPC::Open3;
use Symbol qw(gensym);
use IO::File;
local *CATCHERR = IO::File->new_tmpfile;
my $pid = open3(gensym, \*CATCHOUT, ">&CATCHERR", "cmd");
while( <CATCHOUT> ) {}
waitpid($pid, 0);
seek CATCHERR, 0, 0;
while( <CATCHERR> ) {}
And it'll be faster, too, since we can begin processing the program's stdout immediately, rather than waiting for the program to finish.
With any of these, you can change file descriptors before the call:
open(STDOUT, ">logfile");
system("ls");
or you can use Bourne shell file-descriptor redirection:
$output = `$cmd 2>some_file`;
open (PIPE, "cmd 2>some_file |");
You can also use file-descriptor redirection to make STDERR a duplicate of STDOUT:
$output = `$cmd 2>&1`;
open (PIPE, "cmd 2>&1 |");
Note that you cannot simply open STDERR to be a dup of STDOUT in your Perl program and avoid calling the shell to do the redirection. This doesn't work:
open(STDERR, ">&STDOUT");
$alloutput = `cmd args`; # stderr still escapes
This fails because the open() makes STDERR go to where STDOUT was going at the time of the open(). The backticks then make STDOUT go to a string, but don't change STDERR (which still goes to the old STDOUT).
Note that you must use Bourne shell (sh(1)) redirection syntax in backticks, not csh(1)! Details on why Perl's system() and backtick and pipe opens all use the Bourne shell are in the versus/csh.whynot article in the ``Far More Than You Ever Wanted To Know'' collection in http://www.cpan.org/misc/olddoc/FMTEYEWTK.tgz . To capture a command's STDERR and STDOUT together:
$output = `cmd 2>&1`; # either with backticks
$pid = open(PH, "cmd 2>&1 |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDOUT but discard its STDERR:
$output = `cmd 2>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To capture a command's STDERR but discard its STDOUT:
$output = `cmd 2>&1 1>/dev/null`; # either with backticks
$pid = open(PH, "cmd 2>&1 1>/dev/null |"); # or with an open pipe
while (<PH>) { } # plus a read
To exchange a command's STDOUT and STDERR in order to capture the STDERR but leave its STDOUT to come out our old STDERR:
$output = `cmd 3>&1 1>&2 2>&3 3>&-`; # either with backticks
$pid = open(PH, "cmd 3>&1 1>&2 2>&3 3>&-|");# or with an open pipe
while (<PH>) { } # plus a read
To read both a command's STDOUT and its STDERR separately, it's easiest to redirect them separately to files, and then read from those files when the program is done:
system("program args 1>program.stdout 2>program.stderr");
Ordering is important in all these examples. That's because the shell processes file descriptor redirections in strictly left to right order.
system("prog args 1>tmpfile 2>&1");
system("prog args 2>&1 1>tmpfile");
The first command sends both standard out and standard error to the temporary file. The second command sends only the old standard output there, and the old standard error shows up on the old standard out.
If there are no shell metacharacters in the argument of open(), Perl runs the command directly, without using the shell, and can correctly report whether the command started.
Writing backticks in your program sends a clear message to the readers of your code that you wanted to collect the output of the command. Why send a clear message that isn't true?
Consider this line:
`cat /etc/termcap`;
You forgot to check $? to see whether the program even ran correctly. Even if you wrote
print `cat /etc/termcap`;
this code could and probably should be written as
system("cat /etc/termcap") == 0
or die "cat program failed!";
which will get the output quickly (as it is generated, instead of only at the end) and also check the return value.
system() also provides direct control over whether shell wildcard processing may take place, whereas backticks do not.
@ok = `grep @opts '$search_string' @filenames`;
As of Perl 5.8.0, you can use open() with multiple arguments. Just like the list forms of system() and exec(), no shell escapes happen.
open( GREP, "-|", 'grep', @opts, $search_string, @filenames ); chomp(@ok = <GREP>); close GREP;
You can also:
my @ok = ();
if (open(GREP, "-|")) {
while (<GREP>) {
chomp;
push(@ok, $_);
}
close GREP;
} else {
exec 'grep', @opts, $search_string, @filenames;
}
Just as with system(), no shell escapes happen when you exec() a list. Further examples of this can be found in ``Safe Pipe Opens'' in perlipc.
Note that if you're use Microsoft, no solution to this vexing issue is even possible. Even if Perl were to emulate fork(), you'd still be stuck, because Microsoft does not have a argc/argv-style API.
$where = tell(LOG);
seek(LOG, $where, 0);
If all you want to do is pretend to be telnet but don't need the initial telnet handshaking, then the standard dual-process approach will suffice:
use IO::Socket; # new in 5.004
$handle = IO::Socket::INET->new('www.perl.com:80')
|| die "can't connect to port 80 on www.perl.com: $!";
$handle->autoflush(1);
if (fork()) { # XXX: undef means failure
select($handle);
print while <STDIN>; # everything from stdin to socket
} else {
print while <$handle>; # everything from socket to stdout
}
close $handle;
exit;
To actually alter the visible command line, you can assign to the variable $0 as documented in perlvar. This won't work on all operating systems, though. Daemon programs like sendmail place their state there, as in:
$0 = "orcus [accepting connections]";
fork && exit;
The Proc::Daemon module, available from CPAN, provides a function to perform these actions for you.
if (-t STDIN && -t STDOUT) {
print "Now what? ";
}
On POSIX systems, you can test whether your own process group matches the current process group of your controlling terminal as follows:
use POSIX qw/getpgrp tcgetpgrp/;
open(TTY, "/dev/tty") or die $!;
$tpgrp = tcgetpgrp(fileno(*TTY));
$pgrp = getpgrp();
if ($tpgrp == $pgrp) {
print "foreground\n";
} else {
print "background\n";
}
The alarm() function is not implemented on all versions of Windows. Check the documentation for your specific version of Perl.
Other modules provide more specific access: Win32::ODBC, Alzabo, iodbc, and others found on CPAN Search: http://search.cpan.org .
$rc = system($cmd);
if ($rc & 127) { die "signal death" }
use Fcntl;
sysopen(FH, "/foo/somefile", O_WRONLY|O_NDELAY|O_CREAT, 0644)
or die "can't open /foo/somefile: $!":
When you run a Perl script, something else is running the script for you, and that something else may output error messages. The script might emit its own warnings and error messages. Most of the time you cannot tell who said what.
You probably cannot fix the thing that runs perl, but you can change how perl outputs its warnings by defining a custom warning and die functions.
Consider this script, which has an error you may not notice immediately.
#!/usr/locl/bin/perl
print "Hello World\n";
I get an error when I run this from my shell (which happens to be bash). That may look like perl forgot it has a print() function, but my shebang line is not the path to perl, so the shell runs the script, and I get the error.
$ ./test
./test: line 3: print: command not found
A quick and dirty fix involves a little bit of code, but this may be all you need to figure out the problem.
#!/usr/bin/perl -w
BEGIN {
$SIG{__WARN__} = sub{ print STDERR "Perl: ", @_; };
$SIG{__DIE__} = sub{ print STDERR "Perl: ", @_; exit 1};
}
$a = 1 + undef;
$x / 0;
__END__
The perl message comes out with ``Perl'' in front. The BEGIN block works at compile time so all of the compilation errors and warnings get the ``Perl:'' prefix too.
Perl: Useless use of division (/) in void context at ./test line 9.
Perl: Name "main::a" used only once: possible typo at ./test line 8.
Perl: Name "main::x" used only once: possible typo at ./test line 9.
Perl: Use of uninitialized value in addition (+) at ./test line 8.
Perl: Use of uninitialized value in division (/) at ./test line 9.
Perl: Illegal division by zero at ./test line 9.
Perl: Illegal division by zero at -e line 3.
If I don't see that ``Perl:'', it's not from perl.
You could also just know all the perl errors, and although there are some people who may know all of them, you probably don't. However, they all should be in the perldiag manpage. If you don't find the error in there, it probably isn't a perl error.
Looking up every message is not the easiest way, so let perl to do it for you. Use the diagnostics pragma with turns perl's normal messages into longer discussions on the topic.
use diagnostics;
If you don't get a paragraph or two of expanded discussion, it might not be perl's message.
$ perl -MCPAN -e shell
cpan shell -- CPAN exploration and modules installation (v1.59_54)
ReadLine support enabled
cpan> install Some::Module
To manually install the CPAN module, or any well-behaved CPAN module for that matter, follow these steps:
perl Makefile.PL
make
make test
make install
If your version of perl is compiled without dynamic loading, then you just need to replace step 3 (make) with make perl and you will get a new perl binary with your extension linked in.
See ExtUtils::MakeMaker for more details on building extensions. See also the next question, ``What's the difference between require and use?''.
1) do $file is like eval `cat $file`, except the former
1.1: searches @INC and updates %INC.
1.2: bequeaths an *unrelated* lexical scope on the eval'ed code.
2) require $file is like do $file, except the former
2.1: checks for redundant loading, skipping already loaded files.
2.2: raises an exception on failure to find, compile, or execute $file.
3) require Module is like require "Module.pm", except the former
3.1: translates each "::" into your system's directory separator.
3.2: primes the parser to disambiguate class Module as an indirect object.
4) use Module is like require Module, except the former
4.1: loads the module at compile time, not run-time.
4.2: imports symbols and semantics from that package to the current one.
In general, you usually want "use" and a proper Perl module.
perl Makefile.PL PREFIX=/mydir/perl LIB=/mydir/perl/lib
then either set the PERL5LIB environment variable before you run scripts that use the modules/libraries (see perlrun) or say
use lib '/mydir/perl/lib';
This is almost the same as
BEGIN {
unshift(@INC, '/mydir/perl/lib');
}
except that the lib module checks for machine-dependent subdirectories. See Perl's lib for more information.
use FindBin;
use lib "$FindBin::Bin";
use your_own_modules;
the PERLLIB environment variable
the PERL5LIB environment variable
the perl -Idir command line flag
the use lib pragma, as in
use lib "$ENV{HOME}/myown_perllib";
The latter is particularly useful because it knows about machine dependent architectures. The lib.pm pragmatic module was first included with the 5.002 release of Perl.
This documentation is free; you can redistribute it and/or modify it under the same terms as Perl itself.
Irrespective of its distribution, all code examples in this file are hereby placed into the public domain. You are permitted and encouraged to use this code in your own programs for fun or for profit as you see fit. A simple comment in the code giving credit would be courteous but is not required.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |