[ новости /+++ | форум | теги | ]

NAME
     kcms_calibrate - Configure and calibrate an X11 window  sys-
     tem for use with the KCMS library

SYNOPSIS
     kcms_calibrate

AVAILABILITY
     SUNWkcspg

DESCRIPTION
     kcms_calibrate configures and calibrates an X11 window  sys-
     tem  for  use  with the KCMS library. Monitor calibration is
     performed by measuring the response of the red,  green,  and
     blue  channels  of a frame buffer and color monitor combina-
     tion.

     The user must have a physical calibration device which typi-
     cally  plugs  into  the  workstation's  RS232 serial port or
     choose the XSolarisVisualGamma calibrator module.

     The user will be asked to select a monitor profile from  the
     monitors displayed in the scrolling list.  After selecting a
     monitor, the user then clicks on the Calibrate... button  to
     bring  up  the  calibration  window. Move this window to the
     centre of the monitor. Place the calibration device over the
     circular patch in the centre of the calibration window. Once
     the  calibrator  is  in  place  select  the  Start   button.
     kcms_calibrate automatically searches for all applicable X11
     visuals on the current  window  system  and  configures  and
     calibrates  each  one as needed. PseudoColor and StaticColor
     visuals are assumed to require only one set of measurements.
     TrueColor  and  DirectColor  visuals  if of depth 24 will be
     calibrated separately from the PseudoColor visuals.

     If  you  have  more  than  one  framebuffer  in  a   machine
     kcms_calibrate  will  be  required to be run on each monitor
     attached to the framebuffer.

     kcms_calibrate also allows the user to  various  aspects  of
     profile  data. This data is available via the More... button
     on the main window.

OPTIONS
     none

SEE ALSO
     kcms_configure(1)

DIAGNOSTICS
     kcms_calibrate  will  display  errors  relating  to  profile
     access  and  update  permissions, access to X11 visuals, and
     hardware calibrator problems.  All of these  errors  require
     the  user  to exit the tool and verify the users environment
     or the calibrator's connection to the system.

Партнёры:

Хостинг: