The od command copies sequentially each input file to standard output and transforms the input data according to the output types specified by the -t or -bcCDdFfOoSsvXx options. If no output type is specified, the default output is as if -to2 had been specified. Multiple types can be specified by using multiple -bcCDdFfOoSstvXx options. Output lines are written for each type specified in the order in which the types are specified. If no file is specified, the standard
input is used. The [offset_string] operand is mutually exclusive from the -A, -j, -N, and -t options. For the purposes of this description, the following terms are used:
word
Refers to a 16-bit unit, independent of the word size of the machine.
long word
Refers to a 32-bit unit.
double long word
Refers to a 64-bit unit.
OPTIONS
The following options are supported:
-Aaddress_base
Specifies the input offset base. The address_base option-argument must be a character. The characters d, o and x
specify that the offset base will be written in decimal, octal or hexadecimal, respectively. The character n specifies that the offset will not be written. Unless -An is specified, the output line will be preceded by the input offset, cumulative across
input files, of the next byte to be written. In addition, the offset of the byte following the last byte written will be displayed after all the input data has been processed. Without the -Aaddress_base option and the [offset_string]
operand, the input offset base is displayed in octal.
-b
Interprets bytes in octal. This is equivalent to -to1.
/usr/bin/od
-c
Displays single-byte characters. Certain non-graphic characters appear as C-language escapes:
Others appear as 3-digit octal numbers. For example:
echo "hello world" | od -c
0000000 h e l l o w o r l d \n
0000014
/usr/xpg4/bin/od
-c
Interprets bytes as single-byte or multibyte characters according to the current setting of the LC_CTYPE locale category. Printable multibyte characters are written in the area corresponding to the first byte of the
character. The two-character sequence ** is written in the area corresponding to each remaining byte in the character, as an indication that the character is continued. Non-graphic characters appear the same as they would using the -C option.
-C
Interprets bytes as single-byte or multibyte characters according to the current setting of the LC_CTYPE locale category. Printable multibyte characters are written in the area corresponding to the first byte of the character.
The two-character sequence ** is written in the area corresponding to each remaining byte in the character, as an indication that the character is continued. Certain non-graphic characters appear as C escapes:
Other non-printable characters appear as one three-digit octal number for each byte in the character.
-d
Interprets words in unsigned decimal. This is equivalent to -tu2.
-D
Interprets long words in unsigned decimal. This is equivalent to -tu4.
-f
Interprets long words in floating point. This is equivalent to -tf4.
-F
Interprets double long words in extended precision. This is equivalent to -tf8.
-jskip
Jumps over skip bytes from the beginning of the input. The od command will read or seek past the first skip bytes in the concatenated input
files. If the combined input is not at least skip bytes long, the od command will write a diagnostic message to standard error and exit with a non-zero exit status.
By default, the skip option-argument is interpreted as a decimal number. With a leading 0x or 0X, the offset is interpreted as a hexadecimal number; otherwise, with a leading 0, the offset will be interpreted as
an octal number. Appending the character b, k, or m to offset will cause it to be interpreted as a multiple of 512, 1024 or 1048576 bytes, respectively. If the skip number is hexadecimal, any appended b is considered to be the final hexadecimal digit. The address is displayed starting at 0000000, and its base is not implied by the base of the skip option-argument.
-Ncount
Formats no more than count bytes of input. By default, count is interpreted as a decimal number. With a leading 0x or 0X, count is interpreted as a hexadecimal number; otherwise, with a leading 0, it is interpreted as an octal number. If count bytes of input (after successfully skipping, if -jskip
is specified) are not available, it will not be considered an error. The od command will format the input that is available. The base of the address displayed is not implied by the base of the count option-argument.
-o
Interprets words in octal. This is equivalent to -to2.
-O
Interprets long words in unsigned octal. This is equivalent to -to4.
-s
Interprets words in signed decimal. This is equivalent to -td2.
-S
Interprets long words in signed decimal. This is equivalent to -td4.
-ttype_string
Specifies one or more output types. The type_string option-argument must be a string specifying the types to be used when writing the input data. The string must consist of the
type specification characters:
a
Named character. Interprets bytes as named characters. Only the least significant seven bits of each byte will be used for this type specification. Bytes with the values listed in the following table will
be written using the corresponding names for those characters.
The following are named characters in od:
Value Name
00 nul
01 soh
02 stx
03 etx
04 eot
05 enq
06 ack
07 bel
10 bs
11 ht
12 lf
13 vt
14 ff
15 cr
16 so
17 si
20 dle
21 dc1
22 dc2
23 dc3
24 dc4
25 nak
26 syn
27 etb
30 can
31 em
32 sub
33 esc
34 fs
35 gs
36 rs
37 us
40 sp
177 del
c
Character. Interprets bytes as single-byte or multibyte characters specified by the current setting of the LC_CTYPE locale category. Printable multibyte characters are written in the area corresponding
to the first byte of the character. The two-character sequence ** is written in the area corresponding to each remaining byte in the character, as an indication that the character is continued. Certain non-graphic characters appear as C escapes: \0, \a, \b, \f, \n, \r, \t, \v. Other non-printable characters appear as one three-digit octal number for each byte in the character.
The type specification characters d, f, o, u, and x can be followed by an optional unsigned decimal integer that specifies the number of bytes to be transformed by each instance of the output type.
f
Floating point. Can be followed by an optional F, D, or L indicating that the conversion should be applied to an item of type float, double, or long double, respectively.
d, o, u, and x
Signed decimal, octal, unsigned decimal, and hexadecimal, respectively.
Can be followed by an optional C, S, I, or L indicating that the conversion should be applied to an item of type char, short, int, or long, respectively.
Multiple types can be concatenated within the same type_string and multiple -t options can be specified. Output lines are written for each type specified in the order in which the type specification characters are specified.
-v
Shows all input data (verbose). Without the -v option, all groups of output lines that would be identical to the immediately preceding output line (except for byte offsets), will be replaced with a line containing
only an asterisk (*).
-x
Interprets words in hex. This is equivalent to -tx2.
-X
Interprets long words in hex. This is equivalent to -tx4.
OPERANDS
/usr/bin/od
The following operands are supported for /usr/bin/od only:
-
Uses the standard input in addition to any files specified. When this operand is not given, the standard input is used only if no file operands are specified.
file
A path name of a file to be read. If no file operands are specified, the standard input will be used. If there are no more than two operands, none of the -A, -j, -N, or -t options is specified, and any of the following are true:
1.
the first character of the last operand is a plus sign (+)
2.
the first character of the second operand is numeric
3.
the first character of the second operand is x and the second character of the second operand is a lower-case hexadecimal character or digit
4.
the second operand is named "x"
5.
the second operand is named "."
then the corresponding operand is assumed to be an offset operand rather than a file operand.
Without the -N count option, the display continues until an end-of-file is reached.
The offset_string operand specifies the byte offset in the file where dumping is to commence. The offset is interpreted in octal bytes by default. If offset
begins with "0", it is interpreted in octal. If offset begins with "x" or "0x", it is interpreted in hexadecimal and any appended "b" is considered to be the final hexadecimal digit. If "." is appended,
the offset is interpreted in decimal. If "b" or "B" is appended, the offset is interpreted in units of 512 bytes. If the file argument is omitted, the offset argument must be preceded by a plus sign
(+). The address is displayed starting at the given offset. The radix of the address will be the same as the radix of the offset, if specified, otherwise it will be octal. Decimal overrides octal, and it is an error to specify both hexadecimal and decimal conversions in the same
offset operand.
/usr/xpg4/bin/od
The following operands are supported for /usr/xpg4/bin/od only:
file
Same as /usr/bin/od, except only one of the first two conditions must be true.
Description of offset_string is the same as for /usr/bin/od.
ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables that affect the execution of od: LANG, LC_ALL, LC_CTYPE, LC_MESSAGES, LC_NUMERIC, and NLSPATH.
EXIT STATUS
The following exit values are returned:
0
Successful completion.
>0
An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
