Партнёры:
Хостинг:
NAME
zshcompctl - zsh programmable completion
DESCRIPTION
compctl [ -CDT ] options [ command ... ]
compctl [ -CDT ] options
[ -x pattern options - ... -- ]
[ + options [ -x ... -- ] ... [+] ]
[ command ... ]
compctl -L [ -CDT ] [ command ... ]
compctl + command ...
Control the editor's completion behavior according to the
supplied set of options. Various editing commands, notably
expand-or-complete-word, usually bound to TAB, will attempt
to complete a word typed by the user, while others, notably
delete-char-or-list, usually bound to ^D in emacs editing
mode, list the possibilities; compctl controls what those
possibilities are. They may for example be filenames (the
most common case, and hence the default), shell variables,
or words from a user-specified list.
COMMAND FLAGS
Completion of the arguments of a command may be different
for each command or may use the default. The behavior when
completing the command word itself may also be separately
specified. These correspond to the following flags and
arguments, all of which (except for -L) may be combined with
any combination of the options described subsequently in the
section OPTION FLAGS:
command ...
controls completion for the named commands, which
must be listed last on the command line. If com-
pletion is attempted for a command with a pathname
containing slashes and no completion definition is
found, the search is retried with the last path-
name component. Note that aliases are expanded
before the command name is determined unless the
COMPLETE_ALIASES option is set. Commands should
not be combined with the -D, -C or -T flags.
-D controls default completion behavior for the argu-
ments of commands not assigned any special
behavior. If no compctl -D command has been
issued, filenames are completed.
-C controls completion when the command word itself
is being completed. If no compctl -C command has
been issued, the names of any executable command
(whether in the path or specific to the shell,
such as aliases or functions) are completed.
-T supplies completion flags to be used before any
other processing is done, even those given to
specific commands with other compctl definitions.
This is only useful when combined with extended
completion (the -x flag, see the section EXTENDED
COMPLETION below). Using this flag you can define
default behavior which will apply to all commands
without exception, or you can alter the standard
behavior for all commands. For example, if your
access to the user database is too slow and/or it
contains too many users (so that completion after
~ is too slow to be usable), you can use
compctl -Tx 'C[0,*/*]' -f - 's[~]' -k friends -S/
to complete the strings in the array friends after
a ~. The first argument is necessary so that this
form of ~-completion is not tried after the direc-
tory name is finished.
-L lists the existing completion behavior in a manner
suitable for putting into a start-up script; the
existing behavior is not changed. Any combination
of the above forms may be specified, otherwise all
defined completions are listed. Any other flags
supplied are ignored.
no argument
If no argument is given, compctl lists all defined
completions in an abbreviated form; with a list
of options, all completions with those flags set
(not counting extended completion) are listed.
If the + flag is alone and followed immediately by the
command list, the completion behavior for all the com-
mands in the list is reset to the default. In other
words, completion will subsequently use the options
specified by the -D flag.
OPTION FLAGS
[ -fcFBdeaRGovNAIOPZEnbjrzu ]
[ -k array ] [ -g globstring ] [ -s subststring ]
[ -K function ] [ -H num pattern ]
[ -Q ] [ -P prefix ] [ -S suffix ]
[ -q ] [ -X explanation ]
[ -l cmd ] [ -U ]
The remaining options specify the type of command arguments
to look for during completion. Any combination of these
flags may be specified; the result is a sorted list of all
the possibilities. The options are as follows.
Simple flags
These produce completion lists made up by the shell itself:
-f Filenames and filesystem paths.
-c Command names, including aliases, shell functions,
builtins and reserved words.
-F Function names.
-B Names of builtin commands.
-m Names of external commands.
-w Reserved words.
-a Alias names.
-R Names of regular (non-global) aliases.
-G Names of global aliases.
-d This can be combined with -F, -B, -w, -a, -R and
-G to get names of disabled functions, builtins,
reserved words or aliases.
-e This option (to show enabled commands) is in
effect by default, but may be combined with -d;
-de in combination with -F, -B, -w, -a, -R and -G
will complete names of functions, builtins,
reserved words or aliases whether or not they are
disabled.
-o Names of shell options (see the zshoptions manual
page).
-v Names of any variable defined in the shell.
-N Names of scalar (non-array) parameters.
-A Array names.
-I Names of integer variables.
-O Names of read-only variables.
-p Names of parameters used by the shell (including
special parameters).
-Z Names of shell special parameters.
-E Names of environment variables.
-n Named directories.
-b Key binding names.
-j Job names: the first word of the job leader's
command line. This is useful with the kill buil-
tin.
-r Names of running jobs.
-z Names of suspended jobs.
-u User names.
Flags with arguments
These have user supplied arguments to determine how the list
of completions is to be made up:
-k array
Names taken from the elements of $array (note that
the $ does not appear on the command line).
Alternatively, the argument array itself may be a
set of space- or comma-separated values in
parentheses, in which any delimiter may be escaped
with a backslash; in this case the argument should
be quoted. For example,
compctl -k "(cputime filesize datasize stacksize
coredumpsize resident descriptors)" limit
-g globstring
The globstring is expanded using filename glob-
bing; it should be quoted to protect it from
immediate expansion. The resulting filenames are
taken as the possible completions. Use `*(/)'
instead of `*/' for directories. The fignore spe-
cial parameter is not applied to the resulting
files. More than one pattern may be given
separated by blanks. (Note that brace expansion is
not part of globbing. Use the syntax
`(either|or)' to match alternatives.)
-s subststring
The subststring is split into words and these
words are than expanded using all shell expansion
mechanisms (see the zshexpn manual page). The
resulting words are taken as possible completions.
The fignore special parameter is not applied to
the resulting files. Note that -g is faster for
filenames.
-K function
Call the given function to get the completions.
The function is passed two arguments: the prefix
and the suffix of the word on which completion is
to be attempted, in other words those characters
before the cursor position, and those from the
cursor position onwards. The function should set
the variable reply to an array containing the com-
pletions (one completion per element); note that
reply should not be made local to the function.
From such a function the command line can be
accessed with the -c and -l flags to the read
builtin. For example,
function whoson { reply=(`users`); }
compctl -K whoson talk
completes only logged-on users after `talk'. Note
that `whoson' must return an array so that
"reply=`users`" is incorrect.
-H num pattern
The possible completions are taken from the last
num history lines. Only words matching pattern are
taken. If num is zero or negative the whole his-
tory is searched and if pattern is the empty
string all words are taken (as with `*'). A typi-
cal use is
compctl -D -f + -H 0 '' \
-X '(No file found; using history)'
which forces completion to look back in the his-
tory list for a word if no filename matches. The
explanation string is useful as it tells the user
that no file of that name exists, which is other-
wise ambiguous. (See the next section for -X).
Control flags
These do not directly specify types of name to be completed,
but manipulate the options that do:
-Q This instructs the shell not to quote any meta-
characters in the possible completions. Normally
the results of a completion are inserted into the
command line with any metacharacters quoted so
that they are interpreted as normal characters.
This is appropriate for filenames and ordinary
strings. However, for special effects, such as
inserting a backquoted expression from a comple-
tion array (-k) so that the expression will not be
evaluated until the complete line is executed,
this option must be used.
-P prefix
The prefix is inserted just before the completed
string; any initial part already typed will be
completed and the whole prefix ignored for comple-
tion purposes. For example,
compctl -j -P "%" kill
inserts a `%' after the kill command and then com-
pletes job names.
-S suffix
When a completion is found the suffix is inserted
after the completed string. In the case of menu
completion the suffix is inserted immediately, but
it is still possible to cycle through the list of
completions by repeatedly hitting the same key.
-q If used with a suffix as specified by the previous
option, this causes the suffix to be removed if
the next character typed is a blank or does not
insert anything (the same rule as used for the
AUTO_REMOVE_SLASH option). The option is most
useful for list separators (comma, colon, etc.).
-l cmd
This option cannot be combined with any other. It
restricts the range of command line words that are
considered to be arguments. If combined with one
of the extended completion patterns `p[...]',
`r[...]', or `R[...]' (see the section EXTENDED
COMPLETION below) the range is restricted to the
range of arguments specified in the brackets.
Completion is then performed as if these had been
given as arguments to the cmd supplied with the
option. If the cmd string is empty the first word
in the range is instead taken as the command name,
and command name completion performed on the first
word in the range. For example,
compctl -x 'r[-exec,;]' -l '' -- find
completes arguments between `-exec' and the fol-
lowing `;' (or the end of the command line if
there is no such string) as if they were a
separate command line.
-U Use the whole list of possible completions,
whether or not they actually match the word on the
command line. The word typed so far will be
deleted. This is most useful with a function
(given by the -K option) which can examine the
word components passed to it (or via the read
builtin's -c and -l flags) and use its own cri-
teria to decide what matches. If there is no com-
pletion, the original word is retained.
-X explanation
Print explanation when trying completion on the
current set of options. A `%n' in this string is
replaced by the number of matches.
ALTERNATIVE COMPLETION
compctl [ -CDT ] options + options [ + ... ] [ + ] command
...
The form with `+' specifies alternative options. Completion
is tried with the options before the first `+'. If this pro-
duces no matches completion is tried with the flags after
the `+' and so on. If there are no flags after the last `+'
and a match has not been found up to that point, default
completion is tried.
EXTENDED COMPLETION
compctl [ -CDT ] options -x pattern options - ... -- [ com-
mand ... ]
compctl [ -CDT ] options [ -x pattern options - ... -- ]
[ + options [ -x ... -- ] ... [+] ] [ command ... ]
The form with `-x' specifies extended completion for the
commands given; as shown, it may be combined with alterna-
tive completion using +. Each pattern is examined in turn;
when a match is found, the corresponding options, as
described in the section OPTION FLAGS above, are used to
generate possible completions. If no pattern matches, the
options given before the -x are used.
Note that each pattern should be supplied as a single argu-
ment and should be quoted to prevent expansion of metachar-
acters by the shell.
A pattern is built of sub-patterns separated by commas; it
matches if at least one of these sub-patterns matches (they
are `or'ed'). These sub-patterns are in turn composed of
other sub-patterns separated by white spaces which match if
all of the sub-patterns match (they are `and'ed'). An ele-
ment of the sub-patterns is of the form `c[...][...]', where
the pairs of brackets may be repeated as often as necessary,
and matches if any of the sets of brackets match (an `or').
The example below makes this clearer.
The elements may be any of the following:
s[string] ...
Matches if the current word on the command line
starts with one of the strings given in brackets.
The string is not removed and is not part of the
completion.
S[string] ...
Like s[string] except that the string is part of
the completion.
p[from,to] ...
Matches if the number of the current word is
between one of the from and to pairs inclusive.
The comma and to are optional; to defaults to the
same value as from. The numbers may be negative:
-n refers to the n'th last word on the line.
c[offset,string] ...
Matches if the string matches the word offset by
offset from the current word position. Usually
offset will be negative.
C[offset,pattern] ...
Like c but using pattern matching instead.
w[index,string] ...
Matches if the word in position index is equal to
the corresponding string. Note that the word
count is made after any alias expansion.
W[index,pattern] ...
Like w but using pattern matching instead.
n[index,string] ...
Matches if the current word contains string. Any-
thing up to and including the index'th occurrence
of this string will not be considered part of the
completion, but the rest will. Index may be nega-
tive to count from the end: in most cases, index
will be 1 or -1.
N[index,string] ...
Like n[index,string] except that the string will
be taken as a character class. Anything up to and
including the index'th occurrence of any of the
characters in string will not be considered part
of the completion.
m[min,max] ...
Matches if the total number of words lies between
min and max inclusive.
r[str1,str2]...
Matches if the cursor is after a word with prefix
str1. If there is also a word with prefix str2 on
the command line it matches only if the cursor is
before this word.
R[str1,str2]...
Like r but using pattern matching instead.
EXAMPLE
compctl -u -x 's[+] c[-1,-f],s[-f+]' -g '~/Mail/*(:t)' \
- 's[-f],c[-1,-f]' -f -- mail
This is to be interpreted as follows:
If the current command is mail, then
if ((the current word begins with + and the previous
word is -f) or (the current word begins with -f+)),
then complete the non-directory part (the :t glob
modifier) of files in the directory ~/Mail; else
if the current word begins with -f or the previous word
was -f, then complete any file; else
complete user names.
NOTES
Source for zsh is available in the SUNWzshS package.
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |