Проект OpenNet: MAN ral (4) Специальные файлы /dev/* (FreeBSD и Linux)

Интерактивная система просмотра системных руководств (man-ов)

ral (4)

>> ral (4) ( FreeBSD man: Специальные файлы /dev/* )

ral (7) ( Solaris man: Макропакеты и соглашения )

BSD mandoc

NAME

ral

 - Ralink Technology IEEE 802.11 wireless network driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device ral device wlan

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf5:

if_ral_load="YES"

DESCRIPTION

The driver supports PCI/CardBus wireless adapters based on the Ralink Technology RT2500, RT2501, and RT2600 chipsets.

The RT2500 chipset is the first generation of 802.11b/g adapters from Ralink. It consists of two integrated chips, a RT2560 MAC/BBP and a RT2525 radio transceiver.

The RT2501 chipset is the second generation of 802.11b/g adapters from Ralink. It consists of two integrated chips, a RT2561 MAC/BBP and a RT2527 radio transceiver. This chipset provides support for the IEEE 802.11e standard with multiple hardware transmission queues and allows scatter/gather for efficient DMA operations.

The RT2600 chipset consists of two integrated chips, a RT2661 MAC/BBP and a RT2529 radio transceiver. This chipset uses the MIMO (multiple-input multiple-output) technology with multiple antennas to extend the operating range of the adapter and to achieve higher throughput. MIMO is the basis of the forthcoming IEEE 802.11n standard.

The transmit speed is user-selectable or can be adapted automatically by the driver depending on the received signal strength and on the number of hardware transmission retries.

HARDWARE

The driver supports PCI/CardBus wireless adapters based on the Ralink Technology RT2500, RT2501, and RT2600 chipsets, including:

Card Ta MAC/BBP Ta Bus
"A-Link WL54H" Ta RT2560 Ta PCI
"A-Link WL54PC" Ta RT2560 Ta CardBus
"AirLink101 AWLC5025" Ta RT2661 Ta CardBus
"AirLink101 AWLH5025" Ta RT2661 Ta PCI
"Amigo AWI-914W" Ta RT2560 Ta CardBus
"Amigo AWI-922W" Ta RT2560 Ta mini-PCI
"Amigo AWI-926W" Ta RT2560 Ta PCI
"AMIT WL531C" Ta RT2560 Ta CardBus
"AMIT WL531P" Ta RT2560 Ta PCI
"AOpen AOI-831" Ta RT2560 Ta PCI
"ASUS WL-107G" Ta RT2560 Ta CardBus
"ASUS WL-130g" Ta RT2560 Ta PCI
"Atlantis Land A02-PCI-W54" Ta RT2560 Ta PCI
"Atlantis Land A02-PCM-W54" Ta RT2560 Ta CardBus
"Belkin F5D7000 v3" Ta RT2560 Ta PCI
"Belkin F5D7010 v2" Ta RT2560 Ta CardBus
"Billionton MIWLGRL" Ta RT2560 Ta mini-PCI
"Canyon CN-WF511" Ta RT2560 Ta PCI
"Canyon CN-WF513" Ta RT2560 Ta CardBus
"CC&C WL-2102" Ta RT2560 Ta CardBus
"CNet CWC-854" Ta RT2560 Ta CardBus
"CNet CWP-854" Ta RT2560 Ta PCI
"Compex WL54G" Ta RT2560 Ta CardBus
"Compex WLP54G" Ta RT2560 Ta PCI
"Conceptronic C54RC" Ta RT2560 Ta CardBus
"Conceptronic C54Ri" Ta RT2560 Ta PCI
"Digitus DN-7001G-RA" Ta RT2560 Ta CardBus
"Digitus DN-7006G-RA" Ta RT2560 Ta PCI
"E-Tech WGPC02" Ta RT2560 Ta CardBus
"E-Tech WGPI02" Ta RT2560 Ta PCI
"Edimax EW-7108PCg" Ta RT2560 Ta CardBus
"Edimax EW-7128g" Ta RT2560 Ta PCI
"Eminent EM3036" Ta RT2560 Ta CardBus
"Eminent EM3037" Ta RT2560 Ta PCI
"Encore ENLWI-G-RLAM" Ta RT2560 Ta PCI
"Encore ENPWI-G-RLAM" Ta RT2560 Ta CardBus
"Fiberline WL-400P" Ta RT2560 Ta PCI
"Fibreline WL-400X" Ta RT2560 Ta CardBus
"Gigabyte GN-WI01GS" Ta RT2561S Ta mini-PCI
"Gigabyte GN-WIKG" Ta RT2560 Ta mini-PCI
"Gigabyte GN-WMKG" Ta RT2560 Ta CardBus
"Gigabyte GN-WP01GS" Ta RT2561S Ta PCI
"Gigabyte GN-WPKG" Ta RT2560 Ta PCI
"Hawking HWC54GR" Ta RT2560 Ta CardBus
"Hawking HWP54GR" Ta RT2560 Ta PCI
"iNexQ CR054g-009 (R03)" Ta RT2560 Ta PCI
"JAHT WN-4054P" Ta RT2560 Ta CardBus
"JAHT WN-4054PCI" Ta RT2560 Ta PCI
"LevelOne WNC-0301 v2" Ta RT2560 Ta PCI
"LevelOne WPC-0301 v2" Ta RT2560 Ta CardBus
"Linksys WMP54G v4" Ta RT2560 Ta PCI
"Micronet SP906GK" Ta RT2560 Ta PCI
"Micronet SP908GK V3" Ta RT2560 Ta CardBus
"Minitar MN54GCB-R" Ta RT2560 Ta CardBus
"Minitar MN54GPC-R" Ta RT2560 Ta PCI
"MSI CB54G2" Ta RT2560 Ta CardBus
"MSI MP54G2" Ta RT2560 Ta mini-PCI
"MSI PC54G2" Ta RT2560 Ta PCI
"OvisLink EVO-W54PCI" Ta RT2560 Ta PCI
"PheeNet HWL-PCIG/RA" Ta RT2560 Ta PCI
"Pro-Nets CB80211G" Ta RT2560 Ta CardBus
"Pro-Nets PC80211G" Ta RT2560 Ta PCI
"Repotec RP-WB7108" Ta RT2560 Ta CardBus
"Repotec RP-WP0854" Ta RT2560 Ta PCI
"SATech SN-54C" Ta RT2560 Ta CardBus
"SATech SN-54P" Ta RT2560 Ta PCI
"Sitecom WL-112" Ta RT2560 Ta CardBus
"Sitecom WL-115" Ta RT2560 Ta PCI
"SMC SMCWCB-GM" Ta RT2661 Ta CardBus
"SMC SMCWPCI-GM" Ta RT2661 Ta PCI
"SparkLAN WL-685R" Ta RT2560 Ta CardBus
"Surecom EP-9321-g" Ta RT2560 Ta PCI
"Surecom EP-9321-g1" Ta RT2560 Ta PCI
"Surecom EP-9428-g" Ta RT2560 Ta CardBus
"Sweex LC500050" Ta RT2560 Ta CardBus
"Sweex LC700030" Ta RT2560 Ta PCI
"TekComm NE-9321-g" Ta RT2560 Ta PCI
"TekComm NE-9428-g" Ta RT2560 Ta CardBus
"Unex CR054g-R02" Ta RT2560 Ta PCI
"Unex MR054g-R02" Ta RT2560 Ta CardBus
"Zinwell ZWX-G160" Ta RT2560 Ta CardBus
"Zinwell ZWX-G360" Ta RT2560 Ta mini-PCI
"Zinwell ZWX-G361" Ta RT2560 Ta PCI
"Zonet ZEW1500" Ta RT2560 Ta CardBus
"Zonet ZEW1600" Ta RT2560 Ta PCI

An up to date list can be found at http://damien.bergamini.free.fr/ral/list.html

EXAMPLES

Join an existing BSS network (i.e., connect to an access point):

"ifconfig ral0 inet 192.168.0.20 netmask 0xffffff00"

Join a specific BSS network with network name ``my_net ''

"ifconfig ral0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net"

Join a specific BSS network with 40-bit WEP encryption:

ifconfig ral0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
    wepmode on wepkey 0x1234567890 weptxkey 1

Join a specific BSS network with 104-bit WEP encryption:

ifconfig ral0 inet 192.168.0.20 netmask 0xffffff00 ssid my_net \
    wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

DIAGNOSTICS

"ral%d: could not load 8051 microcode": An error occurred while attempting to upload the microcode to the onboard 8051 microcontroller unit.
"ral%d: timeout waiting for MCU to initialize": The onboard 8051 microcontroller unit failed to initialize in time.
"ral%d: device timeout": A frame dispatched to the hardware for transmission did not complete in time. The driver will reset the hardware. This should not happen.