Интерактивная система просмотра системных руководств (man-ов)
ubsa (4)
>> ubsa (4) ( FreeBSD man: Специальные файлы /dev/* )
BSD mandoc
NAME
ubsa
- USB support for Belkin serial adapters
SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
device ubsadevice ucom
Alternatively, to load the driver as a
module at boot time, place the following line in
loader.conf5:
ubsa_load="YES"
DESCRIPTION
The
driver provides support for the USB-to-RS232 Bridge chip used by a variety of
serial adapters from Belkin and other vendors.
The device is accessed through the
ucom(4)
driver which makes it behave like a
tty(4).
HARDWARE
The
driver supports the following adapters:
AnyData ADU-E100A (no EV-DO mode support)
Belkin F5U103
Belkin F5U120
e-Tek Labs Kwik232
GoHubs GoCOM232
Huawei Technologies Mobile card (3G)
Novatel Wireless Merlin U740 (only basic modem port supported)
Option Globetrotter 3G (aka Vodafone Mobile Connect Card 3G)
Option Globetrotter 3G Quad
Option Globetrotter 3G Fusion (no WLAN support, only basic 3G modem port)
Option Globetrotter 3G Fusion Quad (no WLAN support)
Peracom single port serial adapter
Qualcomm, Inc. ZTE CDMA Technologies MSM
The supported 3G cards provide the necessary modem port for ppp,
pppd, or mpd connections; other functions of these cards (diagnostic port,
SIM toolkit port, WLAN) are not supported.
The
driver
appeared in
Fx 5.0 .
The
uplcom(4)
manual page was adopted from
Nx by
An Tom Rhodes Aq trhodes@FreeBSD.org
in April 2002 and modified for the
driver by
An Alexander Kabaev Aq kan@FreeBSD.org
in October 2002.
AUTHORS
The
driver was written by
An Alexander Kabaev Aq kan@FreeBSD.org .
