Партнёры:
Хостинг:
NAME
gimprc - gimp configuration file
DESCRIPTION
The gimprc file is a configuation file read by the gimp when
it starts up. There are two of these: one system-wide one
stored in /opt/gnome/etc/gimp/1.2/gimprc and a per-user
$HOME/.gimp-1.2/gimprc which may override system settings.
Comments are introduced by a hash sign (#), and continue
until the end of the line. Blank lines are ignored.
The gimprc file associates values with properties. These
properties may be set by lisp-like assignments of the form:
(property-name value)
where:
property-name
is one of the property names described below.
value is the value the property is to be set to.
Either spaces or tabs may be used to separate the name from
the value.
The values have an associated type, described below:
STRING
A sequence of characters surrounded by double-quotes
("). A backslash (\) may be used to escape either
double-quote or itself to generate a literal double-
quote or a literal backslash.
PATH Same as STRING, but path-expansion (see below) is also
performed.
DOUBLE
An optional minus sign (-) followed by zero or more
decimal digits, and optionally a decimal-point (.) fol-
lowed by zero or more decimal digits.
FLOAT
Same as DOUBLE.
INT Same as DOUBLE, except the value is rounded to the next
lowest integer.
BOOLEAN
One of true, on, yes, false, off, or no. Alterna-
tively, the empty string is interpreted to mean true.
POSITION
Same as two INTs separated by whitespace.
MEMSIZE
An INT followed by a size specifier. A size specifier
is one of m, M, k, K, b, or B. The size specified may
be omitted, in which case it defaults to k.
IMAGETYPE
One of rgb, grey, or gray.
COLORCUBE
Four whitespace separated INTs, giving the number of
shades of red, green, blue and grey (respectively) in
the color cube.
PREVIEWSIZE
One of none, tiny, small, or an INT. tiny is 24x24,
small is 32x32, medium is 48x48, large is 64x64 and
huge is 128x128.
UNIT One of inches, millimeters, picas, or or the identifier
of one of the units you have defined in your user units
database.
PROPERTIES
Valid properties and their types:
temp-path PATH
Set the temporary storage directory. Files will appear
here during the course of running the gimp. Most files
will disappear when the gimp exits, but some files are
likely to remain, such as working palette files, so it
is best if this directory not be one that is shared by
other users or is cleared on machine reboot such as
/tmp.
swap-path PATH
Set the swap file location. The gimp uses a tile based
memory allocation scheme. The swap file is used to
quickly and easily swap tiles out to disk and back in.
Be aware that the swap file can easily get very large
if the gimp is used with large images. Also, things
can get horribly slow if the swap file is created on a
directory that is mounted over NFS. For these reasons,
it may be desirable to put your swap file in "/tmp".
brush-path PATH
Set the brush search path. This is a colon-separated
list of directories to be searched for brushes.
pattern-path PATH
Set the pattern search path. This is a colon-separated
list of directories to be searched for patterns.
plug-in-path PATH
Set the plug-in search path. This is a colon-separated
list of directories which will be scanned at startup to
register new plugins.
palette-path PATH
Set the palette search path. This is a colon-separated
list of directories to be searched for palettes.
gradient-path PATH
Set the gradient search path. This is a colon-
separated list of directories to be searched for gra-
dients.
module-path PATH
Set the module search path. This is a colon-separated
list of directories which will be scanned at startup
for modules to be loaded.
default-brush STRING
Specify a default brush. This doesn't actually do any-
thing any more, since the default brush is set as part
of the saved device status.
default-pattern STRING
Specify a default pattern. The pattern is searched for
in the specified pattern path.
default-palette STRING
Specify a default palette. The palette is searched for
in the specified palette path.
default-gradient STRING
Specify a default gradient. The gradient is searched
for in the specified gradient path.
gamma-correction DOUBLE
Set the gamma correction value for the display. 1.0
corresponds to no gamma correction. For most displays,
gamma correction should be set to between 2.0 and 2.6
Run the utility "gamma_correct" to determine appropri-
ate values for your display. XXX is this valid info?
One important item to keep in mind: Many images that
you might get from outside sources will in all likeli-
hood already be gamma-corrected. In these cases, the
image will look washed-out if the gimp has gamma-
correction turned on. If you are going to work with
images of this sort, turn gamma correction off by set-
ting the value to 1.0.
color-cube COLORCUBE
Set the displays color cube. No longer used in gimp-
1.2.x since the introduction of GdkRgb.
install-colormap BOOLEAN
Install a private colormap by default - not actually
used anymore since the introduction of GdkRgb.
tile-cache-size MEMSIZE
The tile cache is used to make sure the gimp doesn't
thrash tiles between memory and disk. Setting this
value higher will cause the gimp to use less swap
space, but will also cause the gimp to use more memory.
Conversely, a smaller cache size causes the gimp to use
more swap space and less memory. Note: the gimp will
still run even if `tile-cache-size' is set to 0. The
actual size can contain a suffix of 'm', 'M', size as
being specified in megabytes, kilobytes and bytes
respectively. If no suffix is specified the size
defaults to being specified in kilobytes.
marching-ants-speed INT
Speed of marching ants in the selection outline. This
value is in milliseconds (less time indicates faster
marching).
last-opened-size INT
How many recently opened image filenames to keep on the
File menu.
undo-levels INT
Set the number of operations kept on the undo stack.
transparency-type INT
Set the manner in which transparency is displayed in
images. Transparency type can be one of 0 - Light
Checks, 1 - Mid-Tone Checks, 2 - Dark Checks, 3 - White
Only, 4 - Gray Only, or 5 - Black Only.
transparency-size INT
Check size can be one of 0 - Small, 1 - Medium, or 2 -
Large
perfect-mouse BOOLEAN
If set to true, the X server is queried for the mouse's
current position on each motion event, rather than
relying on the position hint. This means painting with
large brushes should be more accurate, but it may be
slower. Perversely, on some X servers turning on this
option results in faster painting.
colormap-cycling BOOLEAN
Specify that marching ants for selected regions will be
drawn with colormap cycling as oposed to redrawing with
different stipple masks. This color cycling option
works only with 8-bit displays.
default-threshold INT
Tools such as fuzzy-select and bucket fill find regions
based on a seed-fill algorithm. The seed fill starts
at the intially selected pixel and progresses in all
directions until the difference of pixel intensity from
the original is greater than a specified threshold.
This value represents the default threshold.
stingy-memory-use BOOLEAN
There is always a tradeoff between memory usage and
speed. In most cases, the GIMP opts for speed over
memory. However, if memory is a big issue, set
stingy-memory-use.
allow-resize-windows BOOLEAN
When zooming into and out of images, this option
enables the automatic resizing of windows.
dont-allow-resize-windows BOOLEAN
Negated version of allow-resize-windows.
cursor-updating BOOLEAN
Context-dependent cursors are cool. They are enabled
by default. However, they require overhead that you
may want to do without.
no-cursor-updating BOOLEAN
Negated version of cursor-updating.
preview-size PREVIEWSIZE
Set the layer preview size.
show-rulers BOOLEAN
Set the ruler visibility. The default behavior is for
rulers to be on. This can also be toggled with the
View->Toggle Rulers command or shift+control+r.
dont-show-rulers BOOLEAN
Negated version of show-rulers.
show-statusbar BOOLEAN
Controlling statusbar visibility. The default behavior
is to show the statusbar. This can also be toggled
with the View->Toggle Statusbar command or
shift+control+s.
dont-show-statusbar BOOLEAN
Negated version of show-statusbar.
auto-save BOOLEAN
Auto saving is not yet implemented! Nothing will be
auto-saved, no matter how you set this.
dont-auto-save BOOLEAN
Negated version of auto-save.
cubic-interpolation BOOLEAN
Set the level of interpolation. If set, this option
enables cubic interpolation when scaling or transform-
ing. By default, GIMP uses linear interpolation, which
is faster, but has poorer quality.
confirm-on-close BOOLEAN
Ask for confirmation before closing an image without
saving. This is the default.
dont-confirm-on-close BOOLEAN
Negated version of confirm-on-close.
save-session-info BOOLEAN
Remember the positions and sizes of the main dialogs
and asks your window-manager to place them there again
the next time you use the GIMP.
dont-save-session-info BOOLEAN
Negated version of save-session-info.
save-device-status BOOLEAN
Remember the current tool, pattern, color, and brush
across GIMP sessions.
dont-save-device-status BOOLEAN
Negated version of save-device-status.
always-restore-session BOOLEAN
Let GIMP try to restore your last saved session.
show-tips BOOLEAN
Set to display a handy GIMP tip on startup.
dont-show-tips BOOLEAN
Negated version of show-tips.
show-tool-tips BOOLEAN
Set to display tooltips in the toolbox.
dont-show-tool-tips BOOLEAN
Negated version of show-tool-tips.
default-image-size POSITION
Set the default image size in the File/New dialog.
default-image-type IMAGETYPE
Set the default image type in the File/New dialog.
default-units UNIT
Set the default units for new images and for the
File/New dialog. This units will be used for coordi-
nate display when not in dot-for-dot mode. The default
units can be one of inches , millimeters, points or
picas or the identifier of one of the units defined in
your user units database. The default is inches.
default-xresolution FLOAT
Set the default horizontal resolution for new images
and for the File/New dialog. This value is always in
dpi (dots per inch).
default-yresolution FLOAT
Set the default vertical resolution for new images and
for the File/New dialog. This value is always in dpi
(dots per inch).
default-resolution-units UNIT
Set the units for the display of the default resolution
in the File/New dialog. The default resolution units
can be one of inches, millimeters, points or picas or
the identifier of one of the units defined in your user
unit database. The default is inches.
monitor-xresolution FLOAT
Set the monitor's horizontal resolution, in dots per
inch. If set to 0, forces the X server to be queried
for both horizontal and vertical resolution informa-
tion.
monitor-yresolution FLOAT
Set the monitor's vertical resolution, in dots per
inch. If set to 0, forces the X server to be queried
for both horizontal and vertical resolution informa-
tion.
num-processors INT
On multiprocessor machines, if GIMP has been compiled
with --enable-mp this sets how many processors GIMP
should use simultaneously.
image-title-format STRING
Set the text to appear in image window titles. Certain
% character sequences are recognised and expanded as
follows:
%% literal percent sign
%f bare filename, or "Untitled"
%F full path to file, or "Untitled"
%p PDB image id
%i view instance number
%t image type (RGB, indexed, greyscale)
%z zoom factor as a percentage
%s source scale factor
%d destination scale factor
%Dx expands to x if the image is dirty, the empty
string otherwise. The x can be any character, eg %D*.
The default format string is "%f-%p.%i (%t)".
PATH EXPANSION
Strings of type PATH are expanded in a manner similar to
bash(1). Specifically: tilde (~) is expanded to the user's
home directory, and ${variable} is expanded to the current
value of the variable. Note that the bash feature of being
able to refer to other user's home directories by writing
~userid/ is not valid in this file.
The only variable initially defined is gimp_dir , which is
set to either the interned value .gimp-1.2 or the environ-
ment variable GIMP_DIRECTORY. If the path in GIMP_DIRECTORY
is relative, it is considered relative to your home direc-
tory. The same variable expansion syntax can be used to
refer to environment variables. New variables may be
defined so long as their name does not shadow one of the
property names given in the previous section. Variables are
set using the following syntax:
(variable-name PATH)
Note that the right hand side of this assignment is itself
path expanded before setting the value of the variable.
Typically, the system-wide gimprc file will set a few con-
venience variables:
prefix
The installation prefix for this build, /opt/gnome.
exec_prefix
The path to architecture-specific executables, ${pre-
fix}.
gimp_data_dir
Path to sharable data, ${prefix}/share/gimp/1.2.
gimp_plugin_dir
Base for paths to architecture-specific plugins and
modules, ${exec_prefix}/lib/gimp/1.2.
FILES
/opt/gnome/etc/gimp/1.2/gimprc
System-wide configuration file
$HOME/.gimp-1.2/gimprc
Per-user configuration file
SEE ALSO
gimp(1), gimptool(1), gimp-remote(1)
|
Закладки на сайте Проследить за страницей |
Created 1996-2024 by Maxim Chirkov Добавить, Поддержать, Вебмастеру |