[ новости /+++ | форум | теги | ]

NAME

pts - STREAMS pseudo-tty slave driver
 

DESCRIPTION

The pseudo-tty subsystem simulates a terminal connection, where the master side represents the terminal and the slave represents the user process's special device end point. In order to use the pseudo-tty subsystem, a node for the master side driver /dev/ptmx and N nodes for the slave driver (N is determined at installation time) must be installed. The names of the slave devices are /dev/pts/M where M has the values 0 through N-1. When the master device is opened, the corresponding slave device is automatically locked out. No user may open that slave device until its permissions are adjusted and the device unlocked by calling functions grantpt(3C) and unlockpt(3C). The user can then invoke the open system call with the name that is returned by the ptsname(3C) function. See the example below.

Only one open is allowed on a master device. Multiple opens are allowed on the slave device. After both the master and slave have been opened, the user has two file descriptors which are end points of a full duplex connection composed of two streams automatically connected at the master and slave drivers. The user may then push modules onto either side of the stream pair. The user needs to push the ptem(7M) and ldterm(7M) modules onto the slave side of the pseudo-terminal subsystem to get terminal semantics.

The master and slave drivers pass all messages to their adjacent queues. Only the M_FLUSH needs some processing. Because the read queue of one side is connected to the write queue of the other, the FLUSHR flag is changed to the FLUSHW flag and vice versa. When the master device is closed an M_HANGUP message is sent to the slave device which will render the device unusable. The process on the slave side gets the errno EIO when attempting to write on that stream but it will be able to read any data remaining on the stream head read queue. When all the data has been read, read returns 0 indicating that the stream can no longer be used. On the last close of the slave device, a 0-length message is sent to the master device. When the application on the master side issues a read() or getmsg() and 0 is returned, the user of the master device decides whether to issue a close() that dismantles the pseudo-terminal subsystem. If the master device is not closed, the pseudo-tty subsystem will be available to another user to open the slave device. Since 0-length messages are used to indicate that the process on the slave side has closed and should be interpreted that way by the process on the master side, applications on the slave side should not write 0-length messages. If that occurs, the write returns 0, and the 0-length message is discarded by the ptem module.

The standard STREAMS system calls can access the pseudo-tty devices. The slave devices support the O_NDELAY and O_NONBLOCK flags.  

EXAMPLES

int    fdm fds;
char   *slavename;
extern char *ptsname();

fdm = open("/dev/ptmx", O_RDWR);  /* open master */
grantpt(fdm);                     /* change permission of       slave */
unlockpt(fdm);                    /* unlock slave */
slavename = ptsname(fdm);         /* get name of slave */
fds = open(slavename, O_RDWR);    /* open slave */
ioctl(fds, I_PUSH, "ptem");       /* push ptem */
ioctl(fds, I_PUSH, "ldterm");     /* push ldterm*/

FILES

/dev/ptmx

master clone device

/dev/pts/M

slave devices (M = 0 -> N-1)

SEE ALSO

grantpt(3C), ptsname(3C), unlockpt(3C), ldterm(7M), ptm(7D), ptem(7M)

STREAMS Programming Guide

Index

NAME

DESCRIPTION

EXAMPLES

FILES

SEE ALSO

Партнёры:

Хостинг: