[ новости /+++ | форум | теги | ]

NAME

mke2fs - create an ext2/ext3 filesystem
 

SYNOPSIS

mke2fs -O journal_dev [ -b block-size ] [ -L volume-label ] [ -n ] [ -q ] [ -v ] external-journal [ blocks-count ]  

DESCRIPTION

OPTIONS

-b block-size

Specify the size of blocks in bytes. Valid block size vales are 1024, 2048 and 4096 bytes per block. If omitted, mke2fs block-size is heuristically determined by the file system size and the expected usage of the filesystem (see the -T option). If block-size is negative, then mke2fs will use heuristics to determine the appropriate block size, with the constraint that the block size will be at least block-size bytes. This is useful for certain hardware devices which require that the blocksize be a multiple of 2k.

-c

Check the device for bad blocks before creating the file system. If this option is specified twice, then a slower, read-write test is used instead of a fast read-only test.

-E extended-options

Set extended options for the filesystem. Extended options are comma separated, and may take an argument using the equals ('=') sign. The -E option used to be -R in earlier versions of mke2fs. The -R option is still accepted for backwards compatibility. The following extended options are supported:

stride=stripe-size

Configure the filesystem for a RAID array with stripe-size filesystem blocks per stripe.

resize=max-online-resize

Reserve enough space so that the block group descriptor table can grow to support a filesystem that has max-online-resize blocks.

-f fragment-size

Specify the size of fragments in bytes.

-F

Force mke2fs to run, even if the specified device is not a block special device, or appears to be mounted.

-g blocks-per-group

Specify the number of blocks in a block group. There is generally no reason the user to ever set this parameter, as the default is optimal for the filesystem. (For administrators who are creating filesystems on RAID arrays, it is preferable to use the stride RAID parameter as part of the -R option rather than manipulating the number of blocks per group.) This option is generally used by developers who are developing test cases.

-i bytes-per-inode

Specify the bytes/inode ratio. mke2fs creates an inode for every bytes-per-inode bytes of space on the disk. The larger the bytes-per-inode ratio, the fewer inodes will be created. This value generally shouldn't be smaller than the blocksize of the filesystem, since then too many inodes will be made. Be warned that is not possible to expand the number of inodes on a filesystem after it is created, so be careful deciding the correct value for this parameter.

-j

Create the filesystem with an ext3 journal. If the -J option is not specified, the default journal parameters will be used to create an appropriately sized journal (given the size of the filesystem) stored within the filesystem. Note that you must be using a kernel which has ext3 support in order to actually make use of the journal.

-J journal-options

Create the ext3 journal using options specified on the command-line. Journal options are comma separated, and may take an argument using the equals ('=') sign. The following journal options are supported:

size=journal-size

Create an internal journal (i.e., stored inside the filesystem) of size journal-size megabytes. The size of the journal must be at least 1024 filesystem blocks (i.e., 1MB if using 1k blocks, 4MB if using 4k blocks, etc.) and may be no more than 102,400 filesystem blocks.

device=external-journal

Attach the filesystem to the journal block device located on external-journal. The external journal must already have been created using the command

mke2fs -O journal_dev external-journal

Note that external-journal must have been created with the same block size as the new filesystem. In addition, while there is support for attaching multiple filesystems to a single external journal, the Linux kernel and e2fsck(8) do not currently support shared external journals yet.

Instead of specifying a device name directly, external-journal can also be specified by either LABEL=label or UUID=UUID to locate the external journal by either the volume label or UUID stored in the ext2 superblock at the start of the journal. Use dumpe2fs(8) to display a journal device's volume label and UUID. See also the -L option of tune2fs(8).

Only one of the size or device options can be given for a filesystem.

-l filename

Read the bad blocks list from filename. Note that the block numbers in the bad block list must be generated using the same block size as used by mke2fs. As a result, the -c option to mke2fs is a much simpler and less error-prone method of checking a disk for bad blocks before formatting it, as mke2fs will automatically pass the correct parameters to the badblocks program.

-L new-volume-label

Set the volume label for the filesystem to new-volume-label. The maximum length of the volume label is 16 bytes.

-m reserved-blocks-percentage

Specify the percentage of the filesystem blocks reserved for the super-user. This avoids fragmentation, and allows root-owned daemons, such as syslogd(8), to continue to function correctly after non-privileged processes are prevented from writing to the filesystem. The default percentage is 5%.

-M

Set the last mounted directory for the filesystem. This might be useful for the sake of utilities that key off of the last mounted directory to determine where the filesystem should be mounted.

-n

causes mke2fs to not actually create a filesystem, but display what it would do if it were to create a filesystem. This can be used to determine the location of the backup superblocks for a particular filesystem, so long as the mke2fs parameters that were passed when the filesystem was originally created are used again. (With the -n option added, of course!)

-N number-of-inodes

overrides the default calculation of the number of inodes that should be reserved for the filesystem (which is based on the number of blocks and the bytes-per-inode ratio). This allows the user to specify the number of desired inodes directly.

-o creator-os

Manually override the default value of the "creator os" field of the filesystem. Normally the creator field is set by default to the native OS of the mke2fs executable.

-O feature[,...]

Create filesystem with given features (filesystem options), overriding the default filesystem options. The default features which are enabled by default are specified by the base_features relation, either in the [libdefaults] section in the /etc/mke2fs.conf configuration file, or in the subsection of the [fs_types] section for the filesystem type as specified by the -T option. The filesystem type-specific configuration setting found in the [fs_types] section will override the global default found in [libdefaults].

The filesystem feature set will be further edited using either the feature set specification specified by this option, or if this option is not specified, by the default_features relation for the filesystem type being created, or in the [libdefaults] section of the configuration file.

The filesystem feature set is comprised of a list of features, separated by commas, that are to be enabled. To disable a feature, simply prefix the feature name with a caret ('^') character. The pseudo-filesystem feature "none" will clear all filesystem features.

dir_index

Use hashed b-trees to speed up lookups in large directories.

filetype

Store file type information in directory entries.

has_journal

Create an ext3 journal (as if using the -j option).

journal_dev

Create an external ext3 journal on the given device instead of a regular ext2 filesystem. Note that external-journal must be created with the same block size as the filesystems that will be using it.

resize_inode

Reserve space so the block group descriptor table may grow in the future. Useful for online resizing using resize2fs. By default mke2fs will attempt to reserve enough space so that the filesystem may grow to 1024 times its initial size. This can be changed using resize extended option.

sparse_super

Create a filesystem with fewer superblock backup copies (saves space on large filesystems).

-q

Quiet execution. Useful if mke2fs is run in a script.

-r revision

Set the filesystem revision for the new filesystem. Note that 1.2 kernels only support revision 0 filesystems. The default is to create revision 1 filesystems.

-S

Write superblock and group descriptors only. This is useful if all of the superblock and backup superblocks are corrupted, and a last-ditch recovery method is desired. It causes mke2fs to reinitialize the superblock and group descriptors, while not touching the inode table and the block and inode bitmaps. The e2fsck program should be run immediately after this option is used, and there is no guarantee that any data will be salvageable. It is critical to specify the correct filesystem blocksize when using this option, or there is no chance of recovery.

-T fs-type

Specify how the filesystem is going to be used, so that mke2fs can choose optimal filesystem parameters for that use. The filesystem types that are can be supported are defined in the configuration file /etc/mke2fs.conf(5). The default configuration file contains definitions for the filesystem types: small, floppy, news, largefile, and largefile4.

-v

Verbose execution.

-V

Print the version number of mke2fs and exit.

AUTHOR

BUGS

AVAILABILITY

SEE ALSO

Index

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

AUTHOR

BUGS

AVAILABILITY

SEE ALSO

Партнёры:

Хостинг: