The OpenNET Project / Index page

[ новости /+++ | форум | теги | ]

форумы  помощь  поиск  регистрация  майллист  ВХОД  слежка  RSS
"FreeBSD - mpd"
Вариант для распечатки Архивированная нить - только для чтения! 
Пред. тема | След. тема 
Форумы OpenNET: Виртуальная конференция (Public)
Изначальное сообщение [Проследить за развитием треда]

"FreeBSD - mpd"
Сообщение от Andrey emailИскать по авторуВ закладки(??) on 27-Май-04, 16:19  (MSK)
имею
FreeBSD 5.2.1
mpd 3.15
mpd.conf            
radius:
    set radius config /etc/radius.conf
    set radius retries 3
    set radius timeout 3
    set radius server 100.100.100.100 111 34109 34108
    #set ipcp enable radius-ip
    set bundle enable radius-auth
    set bundle yes radius-acct
    #set iface enable radius-idle radius-mtu
    #set ccp enable radius
pptp_standart:
    set iface disable on-demand
    set bundle disable multilink
    set link yes acfcomp protocomp
    set link no pap chap
    set link enable chap
    set link keep-alive 60 180
    load radius
    #set ipcp yes vjcomp
    set ipcp dns 193.22.6.18
    #set ipcp nbns 192.168.1.78
    set iface enable proxy-arp
    #set bundle enable compression
    set ccp yes mppc
    set ccp yes mpp-e40
    set ccp yes mpp-e128
    set ccp yes mpp-stateless
    set bundle yes crypt-reqd
    set pptp self 10.10.0.1
    set pptp enable incoming
    set pptp disable originate
pptp0:
    new -i ng0 pptp0 pptp0
    set ipcp ranges 192.168.0.1/32 192.168.0.100/32
    load pptp_standart
pptp1:
    new -i ng1 pptp1 pptp1
    set ipcp ranges 192.168.0.1/32 192.168.0.101/32
    load pptp_standart
pptp2:
    new -i ng2 pptp2 pptp2
    set ipcp ranges 192.168.0.1/32 192.168.0.102/32
    load pptp_standart
pptp3:
    new -i ng3 pptp3 pptp3
    set ipcp ranges 192.168.0.1/32 192.168.0.103/32
    load pptp_standart
pptp4:
    new -i ng4 pptp4 pptp4
    set ipcp ranges 192.168.0.1/32 192.168.0.104/32
    load pptp_standart
pptp5:
    new -i ng5 pptp5 pptp5
    set ipcp ranges 192.168.0.1/32 192.168.0.105/32
    load pptp_standart
pptp6:
    new -i ng6 pptp6 pptp6
    set ipcp ranges 192.168.0.1/32 192.168.0.106/32
    load pptp_standart
default:
    load pptp0
    load pptp1
    load pptp2
    load pptp3
    load pptp4
    load pptp5
    load pptp6

пытаюсь подключиться
результат:

[pptp6:pptp6] mpd: PPTP connection from 10.10.0.2:1033
pptp0: attached to connection with 10.10.0.2:1033
[pptp0] IFACE: Open event
[pptp0] IPCP: Open event
[pptp0] IPCP: state change Initial --> Starting
[pptp0] IPCP: LayerStart
[pptp0] IPCP: Open event
[pptp0] bundle: OPEN event in state CLOSED
[pptp0] opening link "pptp0"...
[pptp0] link: OPEN event
[pptp0] LCP: Open event
[pptp0] LCP: state change Initial --> Starting
[pptp0] LCP: LayerStart
[pptp0] device: OPEN event in state DOWN
[pptp0] attaching to peer's outgoing call
[pptp0] device is now in state OPENING
[pptp0] device: UP event in state OPENING
[pptp0] device is now in state UP
[pptp0] link: UP event
[pptp0] link: origination is remote
[pptp0] LCP: Up event
[pptp0] LCP: state change Starting --> Req-Sent
[pptp0] LCP: phase shift DEAD --> ESTABLISH
[pptp0] LCP: SendConfigReq #10
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM d04e7d1c
AUTHPROTO CHAP MSOFTv2
pptp0-0: ignoring SetLinkInfo
[pptp0] LCP: rec'd Configure Request #0 link 0 (Req-Sent)
MAGICNUM 75b62e2c
PROTOCOMP
ACFCOMP
[pptp0] LCP: SendConfigAck #0
MAGICNUM 75b62e2c
PROTOCOMP
ACFCOMP
[pptp0] LCP: state change Req-Sent --> Ack-Sent
[pptp0] LCP: rec'd Configure Nak #10 link 0 (Ack-Sent)
AUTHPROTO CHAP MD5
[pptp0] LCP: SendConfigReq #11
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM d04e7d1c
AUTHPROTO CHAP MD5
[pptp0] LCP: rec'd Configure Ack #11 link 0 (Ack-Sent)
ACFCOMP
PROTOCOMP
MRU 1500
MAGICNUM d04e7d1c
AUTHPROTO CHAP MD5
[pptp0] LCP: state change Ack-Sent --> Opened
[pptp0] LCP: phase shift ESTABLISH --> AUTHENTICATE
[pptp0] LCP: auth: peer wants nothing, I want CHAP
[pptp0] CHAP: sending CHALLENGE
[pptp0] LCP: LayerUp
[pptp0] CHAP: rec'd RESPONSE #1
Name: "1"
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusPutAuth: RADIUS_CHAP (MD5) peer name: 1
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
Response is valid
[pptp0] CHAP: sending SUCCESS
[pptp0] LCP: authorization successful
[pptp0] LCP: phase shift AUTHENTICATE --> NETWORK
[pptp0] setting interface ng0 MTU to 1500 bytes
[pptp0] up: 1 link, total bandwidth 64000 bps
[pptp0] IPCP: Up event
[pptp0] IPCP: state change Starting --> Req-Sent
[pptp0] IPCP: SendConfigReq #15
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] RADIUS: RadiusAccount for: 1
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusAccount: Sending accounting data (Type: 1)
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCOUNTING_RESPONSE for user 1
[pptp0] IPCP: SendConfigReq #16
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] CHAP: rec'd RESPONSE #1
Not expected, but that's OK
Name: "1"
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusPutAuth: RADIUS_CHAP (MD5) peer name: 1
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
Response is valid
[pptp0] CHAP: sending SUCCESS
[pptp0] LCP: authorization successful
[pptp0] IPCP: SendConfigReq #17
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
pptp0-0: ignoring SetLinkInfo
[pptp0] CHAP: rec'd RESPONSE #1
Not expected, but that's OK
Name: "1"
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusPutAuth: RADIUS_CHAP (MD5) peer name: 1
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
Response is valid
[pptp0] CHAP: sending SUCCESS
[pptp0] LCP: authorization successful
[pptp0] IPCP: SendConfigReq #18
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] CHAP: rec'd RESPONSE #1
Not expected, but that's OK
Name: "1"
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusPutAuth: RADIUS_CHAP (MD5) peer name: 1
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
Response is valid
[pptp0] CHAP: sending SUCCESS
[pptp0] LCP: authorization successful
[pptp0] IPCP: SendConfigReq #19
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] CHAP: rec'd RESPONSE #1
Not expected, but that's OK
Name: "1"
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusPutAuth: RADIUS_CHAP (MD5) peer name: 1
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
Response is valid
[pptp0] CHAP: sending SUCCESS
[pptp0] LCP: authorization successful
[pptp0] IPCP: SendConfigReq #20
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] IPCP: rec'd Configure Request #1 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: SendConfigRej #1
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: rec'd Configure Reject #15 link 0 (Req-Sent)
Wrong id#, expecting 20
[pptp0] IPCP: rec'd Configure Request #2 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: SendConfigRej #2
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: rec'd Configure Request #3 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: SendConfigRej #3
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: rec'd Configure Request #4 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: SendConfigRej #4
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: rec'd Configure Reject #16 link 0 (Req-Sent)
Wrong id#, expecting 20
[pptp0] IPCP: rec'd Configure Request #5 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: SendConfigRej #5
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: rec'd Configure Reject #17 link 0 (Req-Sent)
Wrong id#, expecting 20
[pptp0] IPCP: rec'd Configure Request #6 link 0 (Req-Sent)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: not converging
[pptp0] IPCP: parameter negotiation failed
[pptp0] IPCP: state change Req-Sent --> Stopped
[pptp0] IPCP: LayerFinish
[pptp0] bundle: CLOSE event in state OPENED
[pptp0] closing link "pptp0"...
[pptp0] IPCP: rec'd Configure Request #7 link 0 (Stopped)
IPADDR 0.0.0.0
   NAKing with 192.168.0.100
PRIDNS 0.0.0.0
   NAKing with 193.22.6.18
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: LayerStart
[pptp0] IPCP: SendConfigReq #21
IPADDR 192.168.0.1
COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
[pptp0] IPCP: SendConfigRej #7
PRINBNS 0.0.0.0
SECDNS 0.0.0.0
SECNBNS 0.0.0.0
[pptp0] IPCP: state change Stopped --> Req-Sent
[pptp0] bundle: OPEN event in state CLOSED
[pptp0] opening link "pptp0"...
[pptp0] link: CLOSE event
[pptp0] LCP: Close event
[pptp0] LCP: state change Opened --> Closing
[pptp0] LCP: phase shift NETWORK --> TERMINATE
[pptp0] RADIUS: RadiusAccount for: 1
[pptp0] RADIUS: using /etc/radius.conf
[pptp0] RADIUS: RadiusAddServer Adding 100.100.100.100
[pptp0] RADIUS: RadiusAccount: Sending accounting data (Type: 2)
[pptp0] RADIUS: RadiusSendRequest: RAD_ACCOUNTING_RESPONSE for user 1
[pptp0] setting interface ng0 MTU to 1500 bytes
[pptp0] up: 0 links, total bandwidth 9600 bps
[pptp0] RADIUS: Down Event
[pptp0] IPCP: Down event
[pptp0] IPCP: state change Req-Sent --> Starting
[pptp0] LCP: SendTerminateReq #12
[pptp0] LCP: LayerDown
[pptp0] rec'd proto IPCP during terminate phase
[pptp0] link: OPEN event
[pptp0] LCP: Open event
[pptp0] LCP: state change Closing --> Stopping
[pptp0] closing link "pptp0"...
[pptp0] LCP: SendTerminateReq #13
[pptp0] rec'd proto IPCP during terminate phase
[pptp0] link: CLOSE event
[pptp0] LCP: Close event
[pptp0] LCP: state change Stopping --> Closing
[pptp0] rec'd proto IPCP during terminate phase
[pptp0] rec'd proto IPCP during terminate phase
pptp0-0: ignoring SetLinkInfo
[pptp0] rec'd proto IPCP during terminate phase
[pptp0] rec'd proto IPCP during terminate phase
pptp0-0: call cleared by peer
pptp0-0: killing channel
[pptp0] PPTP call terminated
[pptp0] IFACE: Close event
[pptp0] IPCP: Close event
[pptp0] IPCP: state change Starting --> Initial
[pptp0] IPCP: LayerFinish
[pptp0] IFACE: Close event
pptp0: closing connection with 10.10.0.2:1033
[pptp0] LCP: rec'd Terminate Ack #12 link 0 (Closing)
[pptp0] LCP: state change Closing --> Closed
[pptp0] LCP: phase shift TERMINATE --> ESTABLISH
[pptp0] LCP: LayerFinish
[pptp0] bundle: CLOSE event in state OPENED
[pptp0] device: DOWN event in state UP
[pptp0] device is now in state DOWN
[pptp0] link: DOWN event
[pptp0] LCP: Down event
[pptp0] LCP: state change Closed --> Initial
[pptp0] LCP: phase shift ESTABLISH --> DEAD
[pptp0] device: CLOSE event in state DOWN
[pptp0] device is now in state DOWN

на виндах ошибка 734 Протокол управления PPP-связью был прерван

  Рекомендовать в FAQ | Cообщить модератору | Наверх

 Оглавление

Индекс форумов | Темы | Пред. тема | След. тема
Сообщения по теме

1. "FreeBSD - mpd"
Сообщение от Dianis emailИскать по авторуВ закладки(??) on 28-Май-04, 08:22  (MSK)
>имею
>FreeBSD 5.2.1
>mpd 3.15
>mpd.conf
>radius:
>    set radius config /etc/radius.conf
>    set radius retries 3
>    set radius timeout 3
>    set radius server 100.100.100.100 111 34109 34108
>    #set ipcp enable radius-ip
>    set bundle enable radius-auth
>    set bundle yes radius-acct
>    #set iface enable radius-idle radius-mtu
>    #set ccp enable radius
Непонятнка, а хде в списке radius?
>
>
>пытаюсь подключиться
>результат:
>[pptp0] RADIUS: RadiusSendRequest: RAD_ACCESS_ACCEPT for user 1
>[pptp0] RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Ну я так думаю что тут надо посмотреть почему Это происходит
> IPADDR 0.0.0.0
>   NAKing with 192.168.0.100
> PRIDNS 0.0.0.0
>   NAKing with 193.22.6.18
> PRINBNS 0.0.0.0
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
>[pptp0] IPCP: SendConfigRej #1
> PRINBNS 0.0.0.0
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
>[pptp0] IPCP: rec'd Configure Reject #15 link 0 (Req-Sent)
> Wrong id#, expecting 20
>[pptp0] IPCP: rec'd Configure Request #2 link 0 (Req-Sent)
> IPADDR 0.0.0.0
>   NAKing with 192.168.0.100
> PRIDNS 0.0.0.0
>   NAKing with 193.22.6.18
> PRINBNS 0.0.0.0
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
>[pptp0] IPCP: SendConfigRej #2
> PRINBNS 0.0.0.0
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
>[pptp0] IPCP: rec'd Configure Request #3 link 0 (Req-Sent)
> IPADDR 0.0.0.0
>   NAKing with 192.168.0.100
> PRIDNS 0.0.0.0
>   NAKing with 193.22.6.18
> PRINBNS 0.0.0.0
> SECDNS 0.0.0.0
> SECNBNS 0.0.0.0
>на виндах ошибка 734 Протокол управления PPP-связью был прерван
Проверяй как настроен радиус, поскольку настроено так по моему мнению, что привязать IP адрес к интерфейсу как то не получаеться у mpd. Поскольку взять его неоткуда :))

Но я могу и ошибаться.

  Рекомендовать в FAQ | Cообщить модератору | Наверх

2. "FreeBSD - mpd"
Сообщение от Andrey emailИскать по авторуВ закладки(??) on 28-Май-04, 10:19  (MSK)
RADIUS: RadiusGetParams: RAD_SESSION_TIMEOUT: 86400

86400 - это разрешённое максимальное время сесси для клиента 1

  Рекомендовать в FAQ | Cообщить модератору | Наверх


Удалить

Индекс форумов | Темы | Пред. тема | След. тема
Пожалуйста, прежде чем написать сообщение, ознакомьтесь с данными рекомендациями.




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру