Вот такая проблема, имеем ленточную библиотеку MSL2024 и Настроенную BACULu OS CENTOSСперва при насторйке как и пологалось промаркеровал касеты и добавил их в пул
всё шло хорошо бекапилось и записовалось но вот в прекраснный момент, бакула выдала ошибку
27-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 58: Error: block.c:571 Write error at 6:2 on device "MSL2024" (/dev/nst0). ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: Error: Backspace record at EOT failed. ERR=Ошибка ввода/вывода.
несмогла записать на ленту и переключила другую ленту и записала, при следующем бекапе такаяже проюлемма не может записать на туже ленту переключает другую записывает и так далее.
Такое ощющение что бакула считает после первой записи что касета полная в чём может быть дело, ведь до этого всё шло хорошо у меня стоят в двух разных организациях одинаковые системы за исключением что в одной стоит LTO3 а в другой LTO2 ,в одной всё нормально, а вот тут проблемма.
Вот лог бакулы с до ошибки и после
вместо РЅРµ найденРрусские буквы ERR=Ошибка ввода/вывода
13-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 55: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Start Backup JobId 56, Job=Backup_DCM4.2010-06-20_03.00.00_36
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Using Device "MSL2024"
20-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 56: Job write elapsed time = 00:00:01, Transfer rate = 99 bytes/second
20-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 56: Alert: sh: tapeinfo: команда не найденна
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 20-Р˜СЋРЅ-2010 03:00:03
Build OS: i686-pc-linux-gnu redhat
JobId: 56
Job: Backup_DCM4.2010-06-20_03.00.00_36
Backup Level: Incremental, since=2010-06-13 03:00:02
Client: "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
FileSet: "My_Set" 2010-04-15 14:44:39
Pool: "My_Pool" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "msl2024" (From Job resource)
Scheduled time: 20-Р˜СЋРЅ-2010 03:00:00
Start time: 20-Р˜СЋРЅ-2010 03:00:03
End time: 20-Р˜СЋРЅ-2010 03:00:03
Elapsed time: 0 secs
Priority: 10
FD Files Written: 1
SD Files Written: 1
FD Bytes Written: 0 (0 B)
SD Bytes Written: 99 (99 B)
Rate: 0.0 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): tape1
Volume Session Id: 27
Volume Session Time: 1271406325
Last Volume Bytes: 1,450,874,880 (1.450 GB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Backup OK
20-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 56: shell command: run AfterJob "/bin/clearing"
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: shell command: run BeforeJob "/etc/bacula/make_catalog_backup bacula bacula"
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Start Backup JobId 57, Job=BackupCatalog.2010-06-20_06.00.00_37
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Using Device "FileStorage"
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Volume "DiskCatalog" previously written, moving to end of data.
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Ready to append to end of Volume "DiskCatalog" size=14241336
20-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 57: Job write elapsed time = 00:00:01, Transfer rate = 5.647 M bytes/second
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 20-Р˜СЋРЅ-2010 06:00:03
Build OS: i686-pc-linux-gnu redhat
JobId: 57
Job: BackupCatalog.2010-06-20_06.00.00_37
Backup Level: Incremental, since=2010-06-13 06:00:05
Client: "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
FileSet: "Catalog" 2010-04-14 12:56:56
Pool: "My_Pool_Catalog" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "File" (From Job resource)
Scheduled time: 20-Р˜СЋРЅ-2010 06:00:00
Start time: 20-Р˜СЋРЅ-2010 06:00:03
End time: 20-Р˜СЋРЅ-2010 06:00:03
Elapsed time: 0 secs
Priority: 11
FD Files Written: 3
SD Files Written: 3
FD Bytes Written: 5,647,153 (5.647 MB)
SD Bytes Written: 5,647,516 (5.647 MB)
Rate: 0.0 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): DiskCatalog
Volume Session Id: 28
Volume Session Time: 1271406325
Last Volume Bytes: 19,893,538 (19.89 MB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Backup OK
До этого момента всё хорошо а вот тут пошла ошибка
20-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 57: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
27-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 58: Start Backup JobId 58, Job=Backup_DCM4.2010-06-27_03.00.00_38
27-Р˜СЋРЅ 03:00 localhost.localdomain-dir JobId 58: Using Device "MSL2024"
27-Р˜СЋРЅ 03:00 localhost.localdomain-sd JobId 58: Error: block.c:571 Write error at 6:2 on device "MSL2024" (/dev/nst0). ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: Error: Backspace record at EOT failed. ERR=Ошибка ввода/вывода.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: End of medium on Volume "tape1" Bytes=1,450,939,392 Blocks=22,490 at 27-Р˜СЋРЅ-2010 03:01.
27-Р˜СЋРЅ 03:01 localhost.localdomain-sd JobId 58: 3307 Issuing autochanger "unload slot 1, drive 0" command.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3301 Issuing autochanger "loaded? drive 0" command.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
27-Р˜СЋРЅ 03:02 localhost.localdomain-sd JobId 58: 3304 Issuing autochanger "load slot 2, drive 0" command.
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: 3305 Autochanger "load slot 2, drive 0", status is OK.
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: Wrote label to prelabeled Volume "tape2" on device "MSL2024" (/dev/nst0)
27-Р˜СЋРЅ 03:03 localhost.localdomain-sd JobId 58: New volume "tape2" mounted on device "MSL2024" (/dev/nst0) at 27-Р˜СЋРЅ-2010 03:03.
27-Р˜СЋРЅ 03:15 localhost.localdomain-sd JobId 58: Job write elapsed time = 00:13:17, Transfer rate = 20.07 M bytes/second
27-Р˜СЋРЅ 03:15 localhost.localdomain-sd JobId 58: Alert: sh: tapeinfo: команда РЅРµ найдена
27-Р˜СЋРЅ 03:15 localhost.localdomain-dir JobId 58: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 27-Р˜СЋРЅ-2010 03:15:56
Build OS: i686-pc-linux-gnu redhat
JobId: 58
Job: Backup_DCM4.2010-06-27_03.00.00_38
Backup Level: Incremental, since=2010-06-20 03:00:03
Client: "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
FileSet: "My_Set" 2010-04-15 14:44:39
Pool: "My_Pool" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "msl2024" (From Job resource)
Scheduled time: 27-Р˜СЋРЅ-2010 03:00:00
Start time: 27-Р˜СЋРЅ-2010 03:00:02
End time: 27-Р˜СЋРЅ-2010 03:15:56
Elapsed time: 15 mins 54 secs
Priority: 10
FD Files Written: 4,821
SD Files Written: 4,821
FD Bytes Written: 15,996,139,520 (15.99 GB)
SD Bytes Written: 15,996,896,990 (15.99 GB)
Rate: 16767.4 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): tape1|tape2
Volume Session Id: 29
Volume Session Time: 1271406325
Last Volume Bytes: 16,008,910,848 (16.00 GB)
Non-fatal FD errors: 0
SD Errors: 2
FD termination status: OK
SD termination status: OK
Termination: Backup OK -- with warnings
27-Р˜СЋРЅ 03:15 localhost.localdomain-dir JobId 58: shell command: run AfterJob "/bin/clearing"
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: shell command: run BeforeJob "/etc/bacula/make_catalog_backup bacula bacula"
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Start Backup JobId 59, Job=BackupCatalog.2010-06-27_06.00.00_39
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Using Device "FileStorage"
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Volume "DiskCatalog" previously written, moving to end of data.
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Ready to append to end of Volume "DiskCatalog" size=19893538
27-Р˜СЋРЅ 06:00 localhost.localdomain-sd JobId 59: Job write elapsed time = 00:00:01, Transfer rate = 94.71 M bytes/second
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 27-Р˜СЋРЅ-2010 06:00:18
Build OS: i686-pc-linux-gnu redhat
JobId: 59
Job: BackupCatalog.2010-06-27_06.00.00_39
Backup Level: Incremental, since=2010-06-20 06:00:03
Client: "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
FileSet: "Catalog" 2010-04-14 12:56:56
Pool: "My_Pool_Catalog" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "File" (From Job resource)
Scheduled time: 27-Р˜СЋРЅ-2010 06:00:00
Start time: 27-Р˜СЋРЅ-2010 06:00:18
End time: 27-Р˜СЋРЅ-2010 06:00:18
Elapsed time: 0 secs
Priority: 11
FD Files Written: 3
SD Files Written: 3
FD Bytes Written: 94,711,375 (94.71 MB)
SD Bytes Written: 94,711,739 (94.71 MB)
Rate: 0.0 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): DiskCatalog
Volume Session Id: 30
Volume Session Time: 1271406325
Last Volume Bytes: 114,676,023 (114.6 MB)
Non-fatal FD errors: 0
SD Errors: 0
FD termination status: OK
SD termination status: OK
Termination: Backup OK
27-Р˜СЋРЅ 06:00 localhost.localdomain-dir JobId 59: shell command: run AfterJob "/etc/bacula/delete_catalog_backup"
04-Р˜СЋР» 03:00 localhost.localdomain-dir JobId 60: Start Backup JobId 60, Job=Backup_DCM4.2010-07-04_03.00.00_40
04-Р˜СЋР» 03:00 localhost.localdomain-dir JobId 60: Using Device "MSL2024"
04-Р˜СЋР» 03:00 localhost.localdomain-sd JobId 60: Error: block.c:571 Write error at 17:1 on device "MSL2024" (/dev/nst0). ERR=Ошибка РІРІРѕРґР°/вывода.
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: Error: Backspace record at EOT failed. ERR=Ошибка РІРІРѕРґР°/вывода
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: End of medium on Volume "tape2" Bytes=16,008,975,360 Blocks=248,154 at 04-Р˜СЋР»-2010 03:01.
04-Р˜СЋР» 03:01 localhost.localdomain-sd JobId 60: 3307 Issuing autochanger "unload slot 2, drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3301 Issuing autochanger "loaded? drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3304 Issuing autochanger "load slot 3, drive 0" command.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: 3305 Autochanger "load slot 3, drive 0", status is OK.
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: Wrote label to prelabeled Volume "tape3" on device "MSL2024" (/dev/nst0)
04-Р˜СЋР» 03:03 localhost.localdomain-sd JobId 60: New volume "tape3" mounted on device "MSL2024" (/dev/nst0) at 04-Р˜СЋР»-2010 03:03.
04-Р˜СЋР» 03:19 localhost.localdomain-sd JobId 60: Job write elapsed time = 00:16:40, Transfer rate = 19.98 M bytes/second
04-Р˜СЋР» 03:19 localhost.localdomain-sd JobId 60: Alert: sh: tapeinfo: команда РЅРµ найдена
04-Р˜СЋР» 03:19 localhost.localdomain-dir JobId 60: Bacula localhost.localdomain-dir 3.0.3 (18Oct09): 04-Р˜СЋР»-2010 03:19:26
Build OS: i686-pc-linux-gnu redhat
JobId: 60
Job: Backup_DCM4.2010-07-04_03.00.00_40
Backup Level: Incremental, since=2010-06-27 03:00:02
Client: "localhost.localdomain-fd" 3.0.3 (18Oct09) i686-pc-linux-gnu,redhat,
FileSet: "My_Set" 2010-04-15 14:44:39
Pool: "My_Pool" (From Job resource)
Catalog: "MyCatalog" (From Client resource)
Storage: "msl2024" (From Job resource)
Scheduled time: 04-Р˜СЋР»-2010 03:00:00
Start time: 04-Р˜СЋР»-2010 03:00:02
End time: 04-Р˜СЋР»-2010 03:19:26
Elapsed time: 19 mins 24 secs
Priority: 10
FD Files Written: 5,870
SD Files Written: 5,870
FD Bytes Written: 19,984,148,480 (19.98 GB)
SD Bytes Written: 19,985,070,657 (19.98 GB)
Rate: 17168.5 KB/s
Software Compression: None
VSS: no
Encryption: no
Accurate: no
Volume name(s): tape2|tape3
Volume Session Id: 31
Volume Session Time: 1271406325
Last Volume Bytes: 20,000,074,752 (20.00 GB)
Non-fatal FD errors: 0
SD Errors: 2
FD termination status: OK
SD termination status: OK
Termination: Backup OK -- with warnings
Помогите кто чем может кто советом кто ссылкой на умное место))) заранее благадарю