Добрый день!
Есть два маршрутизатора 7206. К каждому приходят два провайдера ISP1 и ISP2.
Выдана сеть z.z.z.0/23Настроено следующим образом:
interface GigabitEthernet0/1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no ip mroute-cache
duplex auto
speed 1000
media-type rj45
negotiation auto
no cdp enable
!
interface GigabitEthernet0/1.1
encapsulation dot1Q 11
ip address 10.2.22.2 255.255.255.248
no snmp trap link-status
no cdp enable
standby 1 ip 10.2.22.1
standby 1 priority 105
standby 1 preempt delay minimum 10
standby 1 authentication md5 key-string 7 122B0C161C1119067E
standby 1 track GigabitEthernet0/2
!
interface GigabitEthernet0/1.2
encapsulation dot1Q 12
ip address 10.2.22.11 255.255.255.248
no snmp trap link-status
no cdp enable
standby 2 ip 10.2.22.9
standby 2 preempt
standby 2 authentication md5 key-string 7 122B0C161C1119067E
interface GigabitEthernet0/2
description Synterra
ip address 213.a.b.c 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no ip mroute-cache
duplex full
speed 1000
media-type rj45
negotiation auto
no cdp enable
!
interface GigabitEthernet0/3
description IIAT
ip address 212.a.b.c 255.255.255.252
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no ip mroute-cache
duplex auto
speed auto
media-type rj45
negotiation auto
no cdp enable
router bgp MyAS
bgp router-id 212.a.b.c
bgp log-neighbor-changes
neighbor 212.x.x.x remote-as ISP1
neighbor 212.x.x.x version 4
neighbor 213.y.y.y remote-as ISP2
neighbor 213.y.y.y version 4
maximum-paths 2
!
address-family ipv4
redistribute static
neighbor 212.x.x.x activate
neighbor 212.x.x.x soft-reconfiguration inbound
neighbor 212.x.x.x route-map map-AS#ISP1 out
neighbor 213.y.y.y activate
neighbor 213.y.y.y soft-reconfiguration inbound
neighbor 213.y.y.y route-map map-AS#ISP2-out out
maximum-paths 2
no auto-summary
no synchronization
network z.z.z.0 mask 255.255.254.0
exit-address-family
!
address-family nsap
maximum-paths 2
no synchronization
exit-address-family
route-map map-AS#ISP2-out permit 10
match ip address prefix-list out-as#ISP2
set as-path prepend MyAS MyAS MyAS
!
route-map static-route permit 10
match ip address prefix-list default-route
!
route-map map-AS#ISP1 permit 10
match ip address prefix-list out-as#ISP2
ip route z.z.z.0 255.255.254.0 10.2.22.4
Как мне можно попилить ее на две подсети /24?
Можно ли одну сеть статикой пророутить в локалку
ip route z.z.1.0 255.255.255.0 10.2.22.4
а другую сеть повесить на interface GigabitEthernet0/1.3 например.